# File opened at 2012-10-03 14:38:41.975795
# aquire[DAC_Settle] = 0.0
# aquire[open_files] = [<open file '2012-10-03/143841.dat', mode 'w' at 0x24b6c00>]
# aquire[DAC_Sweep] = 0.0 + 10.0*int(step)
# aquire[ADC_Averages] = 200
# aquire[start_date] = 2012-10-03
# Parameters:
# Chamber Pressure = 1.49e-08
# Deflection Voltage = -0.608
# Title = Au(70min) on Si
# Comment = Au layer still not visible (current too low?)
# 602 Scale = 1e-6 x 0.1
# Venault Voltage = 10.35
# Accelerating Voltage = 264
# Focus Voltage = 8.17
# Initial Voltage = sweep
# Heating Current = 1.149
# Heating Voltage (across filament) = 1.181
# Heating Voltage (across power supply) = 1.561
# 602 Zero = 0.00
# 602 0.1 Battery = 8.05
# 602 0.03 Battery = 8.40
# 602 0.01 Battery = 8.20
# 602 0.003 Battery = 8.18
# 602 0.001 Battery = 8.22
# Sample = Au (30min + 70min 4.0A e-8mbar) on Si
# Sample Angle = 142
# ADC Regulator = 3.32
# Data = time DAC ADC5 ADC5_sigma
# Parameters last checked = 2012-10-03 13:52:44.536577

# Experiment 2012-10-03 14:38:42.484607
# Polling for Nones.

# Data:
# time	DAC	ADC5
2.52715206146	0	0.0	0.0
3.16204309464	10	0.0	0.0
3.80254459381	20	0.0	0.0
4.43669700623	30	0.0	0.0
5.06419849396	40	0.0	0.0
# Recieved KILL signal.
# Reason: Stop for evaporation
# File closed at 2012-10-03 14:38:51.288719