X-Git-Url: https://git.ucc.asn.au/?a=blobdiff_plain;f=Kernel%2Finclude%2Fapi_drv_terminal.h;h=3142d33cb650972f4fb19358fa75ac4775cfd0dd;hb=HEAD;hp=7e53bbc30273d6253eb18a6047030bcdf9f0b46a;hpb=e6795eb552a6be88b7870dae14a958ab391bfae8;p=tpg%2Facess2.git

diff --git a/Kernel/include/api_drv_terminal.h b/Kernel/include/api_drv_terminal.h
deleted file mode 100644
index 7e53bbc3..00000000
--- a/Kernel/include/api_drv_terminal.h
+++ /dev/null
@@ -1,157 +0,0 @@
-/**
- * \file api_drv_terminal.h
- * \brief Terminal Driver Interface Definitions
-*/
-#ifndef _API_DRV_TERMINAL_H
-#define _API_DRV_TERMINAL_H
-
-#include <api_drv_common.h>
-
-/**
- * \brief Common Terminal IOCtl Calls
- * \extends eTplDrv_IOCtl
- */
-enum eTplTerminal_IOCtl {
-	/**
-	 * ioctl(..., int *mode)
-	 * \brief Get/Set the current video mode type
-	 * \param mode Pointer to an integer with the new mode number (or NULL)
-	 *             If \a mode is non-NULL the current terminal mode is changed/updated
-	 *             to the mode indicated by \a *mode
-	 * \note See ::eTplTerminal_Modes
-	 * \return Current/new terminal mode
-	*/
-	TERM_IOCTL_MODETYPE = 4,
-	
-	/**
-	 * ioctl(..., int *width)
-	 * \brief Get/set the display width
-	 * \param width	Pointer to an integer containing the new width (or NULL)
-	 * \return Current/new width
-	 * 
-	 * If \a width is non-NULL the current width is updated (but is not
-	 * applied until ::TERM_IOCTL_MODETYPE is called with \a mode non-NULL.
-	 */
-	TERM_IOCTL_WIDTH,
-	
-	/**
-	 * ioctl(..., int *height)
-	 * \brief Get/set the display height
-	 * \param height	Pointer to an integer containing the new height
-	 * \return Current height
-	 * 
-	 * If \a height is non-NULL the current height is updated (but is not
-	 * applied until ::TERM_IOCTL_MODETYPE is called with a non-NULL \a mode.
-	 */
-	TERM_IOCTL_HEIGHT,
-	
-	/**
-	 * ioctl(..., tTerm_IOCtl_Mode *info)
-	 * \brief Queries the current driver about it's native modes
-	 * \param info	A pointer to a ::tTerm_IOCtl_Mode with \a ID set to
-	 *        the mode index (or NULL)
-	 * \return Number of modes
-	 * 
-	 * If \a info is NULL, the number of avaliable vative display modes
-	 * is returned. These display modes will have sequential ID numbers
-	 * from zero up to this value.
-	 * 
-	 * \note The id field of \a info is not for use with ::TERM_IOCTL_MODETYPE
-	 *       This field is just for indexing the mode to get its information.
-	 */
-	TERM_IOCTL_QUERYMODE,
-	
-	/**
-	 * ioctl(...)
-	 * \brief Forces the current terminal to be shown
-	 */
-	TERM_IOCTL_FORCESHOW,
-	
-	/**
-	 * ioctl(...)
-	 * \brief Returns the current text cursor position
-	 * \return Cursor position (as X+Y*Width)
-	 */
-	TERM_IOCTL_GETCURSOR
-};
-
-/**
- * \brief Virtual Terminal Mode
- * Describes a VTerm mode to the caller of ::TERM_IOCTL_QUERYMODE
- */
-typedef struct sTerm_IOCtl_Mode
-{
-	short	ID;		//!< Zero Based index of mode
-	short	DriverID;	//!< Driver's ID number (from ::tVideo_IOCtl_Mode)
-	Uint16	Height;	//!< Height
-	Uint16	Width;	//!< Width
-	Uint8	Depth;	//!< Bits per cell
-	struct {
-		unsigned bText: 1;	//!< Text Mode marker
-		unsigned unused:	7;
-	};
-}	tTerm_IOCtl_Mode;
-
-/**
- * \brief Terminal Modes
- */
-enum eTplTerminal_Modes {
-	/**
-	 * \brief UTF-8 Text Mode
-	 * Any writes to the terminal file are treated as UTF-8 encoded
-	 * strings and reads will also return UTF-8 strings.
-	 */
-	TERM_MODE_TEXT,
-	
-	/**
-	 * \brief 32bpp Framebuffer
-	 * Writes to the terminal file will write to the framebuffer.
-	 * Reads will return UTF-32 characters
-	 */
-	TERM_MODE_FB,
-	
-	/**
-	 * \brief 32bpp 2D Accellerated mode
-	 * Writes to the terminal file will be read as a command stream
-	 * defined in ::eTplTerminal_2D_Commands
-	 */
-	TERM_MODE_2DACCEL,
-	
-	/**
-	 * \brief OpenGL 2D/3D
-	 * Writes to the terminal file will send 3D commands
-	 * Reads will return UTF-32 characters
-	 * \note May or may not stay in the spec
-	 */
-	TERM_MODE_3D,
-	
-	/**
-	 * \brief Number of terminal modes
-	 */
-	NUM_TERM_MODES
-};
-
-/**
- * \brief 2D Command IDs
- * \todo Complete this structure
- * 
- * Command IDs for when the terminal type is eTplTerminal_Modes.TERM_MODE_2DACCEL
- */
-enum eTplTerminal_2D_Commands
-{
-	/**
-	 * \brief No Operation - Used for padding
-	 */
-	TERM_2DCMD_NOP,
-	
-	/**
-	 * (Uint16 X, Y, W, H, Uint32 Data[])
-	 * \brief Blits a bitmap to the display
-	 * \param X,Y	Coordinates of Top-Left corner
-	 * \param W,H	Dimensions
-	 * \param Data	32-bpp pixel data
-	 */
-	TERM_2DCMD_PUSH
-};
-
-#endif