X-Git-Url: https://git.ucc.asn.au/?a=blobdiff_plain;f=Kernel%2Finclude%2Ftpl_drv_common.h;h=632f3dcb50c2e6615bed78e945c6c48d90c77017;hb=41769c02317835472d7678d3531ecfc23df8e17a;hp=31ad97a017cd6ce35e49937fde5cc18dcc17b59d;hpb=8bc40333b1401d7616b225945fee53d972c2f418;p=tpg%2Facess2.git

diff --git a/Kernel/include/tpl_drv_common.h b/Kernel/include/tpl_drv_common.h
index 31ad97a0..632f3dcb 100644
--- a/Kernel/include/tpl_drv_common.h
+++ b/Kernel/include/tpl_drv_common.h
@@ -1,8 +1,36 @@
 /**
- AcessOS Version 1
- \file tpl_drv_common.h
- \brief Common Driver Interface Definitions
-*/
+ * \file tpl_drv_common.h
+ * \brief Common Driver Interface Definitions
+ * \author John Hodge (thePowersGang)
+ * 
+ * \section Introduction
+ * There are two ways Acess drivers can communicate with userspace
+ * applications, both are through the VFS. The first is by exposing a
+ * device as a file buffer, the second is by sending commands via the
+ * ioctl() system call.
+ * All drivers in Acess must at least conform to the specifcation in this
+ * file (even if it is just implementing eTplDrv_IOCtl.DRV_IOCTL_TYPE and
+ * returning eTplDrv_Type.DRV_TYPE_NULL, however, doing so is discouraged)
+ * 
+ * \section ioctls Core IOCtl calls
+ * As said, the core Acess driver specifcation defines specific IOCtl calls
+ * that all drivers should implement. The four core IOCtls (defined in
+ * ::eTplDrv_IOCtl) allow another binary (wether it be a user-mode application
+ * or another driver) to tell what type of device a driver provides, the
+ * basic identifcation of the driver (4 character ID and BCD version number)
+ * and be able to use externally standardised calls that may not have
+ * standardised call numbers.
+ * NOTE: All ioctl calls WILL return -1 if the driver ran into an error
+ * of its own fault while executing the call. If the user was at fault
+ * (e.g. by passing a bad buffer) the call will return -2.
+ * 
+ * \section types Driver Types
+ * When the eTplDrv_IOCtl.DRV_IOCTL_TYPE call is made, the driver should
+ * return the relevant entry in the ::eTplDrv_Type enumeration that describes
+ * what sub-specifcation (and hence, what device type) it implements.
+ * These device types are described in their own files, which are liked
+ * from their entries in ::eTplDrv_Type.
+ */
 #ifndef _TPL_COMMON_H
 #define _TPL_COMMON_H
 
@@ -11,16 +39,83 @@
  * \brief Common IOCtl Calls
  */
 enum eTplDrv_IOCtl {
-	/// \brief Driver Type - Return an ::eTplDrv_Type value
+	/**
+	 * ioctl(...)
+	 * \brief Get driver type
+	 * \return The relevant entry from ::eTplDrv_Type
+	 */
 	DRV_IOCTL_TYPE,
-	/// \brief Get driver identifier - (char *dest[4])
+	
+	/**
+	 * ioctl(..., char *dest[32])
+	 * \brief Get driver identifier string
+	 * \return 0 on no error
+	 * 
+	 * This call sets the 32-byte array \a dest to the drivers 31 charater
+	 * identifier. This identifier must be unique to the driver series.
+	 */
 	DRV_IOCTL_IDENT,
-	/// \brief Get driver version - (int *ver)
+	
+	/**
+	 * ioctl(...)
+	 * \brief Get driver version number
+	 * \return 24-bit BCD version number (2.2.2)
+	 * 
+	 * This call returns the 6-digit (2 major, 2 minor, 2 patch) version
+	 * number of the driver.
+	 */
 	DRV_IOCTL_VERSION,
-	/// \brief Get a IOCtl from a symbolic name
-	DRV_IOCTL_LOOKUP,
+	
+	/**
+	 * ioctl(..., char *name)
+	 * \brief Get a IOCtl call ID from a symbolic name
+	 * \return ID number of the call, or 0 if not found
+	 * 
+	 * This call allows user applications to not need to know the ID numbers
+	 * of this driver's IOCtl calls by taking a string and returning the
+	 * IOCtl call number associated with that method name.
+	 */
+	DRV_IOCTL_LOOKUP
 };
 
+/**
+ * \brief eTplDrv_IOCtl.DRV_IOCTL_LOOKUP names for the core IOCtls
+ * These are the official lookup names of the core calls
+ */
+#define	DRV_IOCTLNAMES	"type", "ident", "version", "lookup"
+
+/**
+ * \brief Helper macro for the base IOCtl calls
+ * \param _type	Type number from eTplDrv_Type to return
+ * \param _ident	String of max 32-characters that identifies this driver
+ * \param _version	Driver's 8.8.8 BCD version number
+ * \param _ioctls	Pointer to the IOCtls string array
+ * \warning If you have DEBUG enabled in the calling file, this function
+ *          will do LEAVE()s before returning, so make sure that the
+ *          IOCtl function is ENTER()ed when using debug with this macro
+ * 
+ * Usage: (Id is the IOCtl call ID)
+ * \code
+ * switch(Id)
+ * {
+ * BASE_IOCTLS(DRV_TYPE_MISC, "Ident", 0x100, csaIOCtls)
+ * // Your IOCtls go here, starting at index 4
+ * }
+ * \endcode
+ */
+#define BASE_IOCTLS(_type, _ident, _version, _ioctls)	\
+	case DRV_IOCTL_TYPE:	LEAVE('i', (_type));	return (_type);\
+	case DRV_IOCTL_IDENT: {\
+		int tmp = ModUtil_SetIdent(Data, (_ident));\
+		LEAVE('i', tmp);	return tmp;\
+		}\
+	case DRV_IOCTL_VERSION:	LEAVE('x', (_version));	return (_version);\
+	case DRV_IOCTL_LOOKUP:{\
+		int tmp = ModUtil_LookupString( (char**)(_ioctls), (char*)Data );\
+		LEAVE('i', tmp);\
+		return tmp;\
+		}
+
 /**
  * \enum eTplDrv_Type
  * \brief Driver Types returned by DRV_IOCTL_TYPE
@@ -28,17 +123,14 @@ enum eTplDrv_IOCtl {
 enum eTplDrv_Type {
 	DRV_TYPE_NULL,		//!< NULL Type - Custom Interface
 	DRV_TYPE_MISC,		//!< Miscelanious Compilant - Supports the core calls
-	DRV_TYPE_TERMINAL,	//!< Terminal
-	DRV_TYPE_VIDEO,		//!< Video - LFB
+	DRV_TYPE_TERMINAL,	//!< Terminal - see tpl_drv_terminal.h
+	DRV_TYPE_VIDEO,		//!< Video - see tpl_drv_video.h
 	DRV_TYPE_SOUND,		//!< Audio
-	DRV_TYPE_DISK,		//!< Disk
-	DRV_TYPE_KEYBOARD,	//!< Keyboard
+	DRV_TYPE_DISK,		//!< Disk - see tpl_drv_disk.h
+	DRV_TYPE_KEYBOARD,	//!< Keyboard - see tpl_drv_keyboard.h
 	DRV_TYPE_MOUSE,		//!< Mouse
 	DRV_TYPE_JOYSTICK,	//!< Joystick / Gamepad
-	DRV_TYPE_NETWORK	//!< Network Device
+	DRV_TYPE_NETWORK	//!< Network Device - see tpl_drv_network.h
 };
 
-// === FUNCTIONS ===
-extern int	GetIOCtlId(int Class, char *Name);
-
 #endif