X-Git-Url: https://git.ucc.asn.au/?a=blobdiff_plain;f=research%2FTCS%2Finterface.py;h=eab484bc5ff21e97de268097d6465efb6184a9cb;hb=93d5acb53e1348ba4e288874837fc6085b74f863;hp=869d11ccb338414170d6721505d65d51f67bd622;hpb=b64d0037c97e4d874f1b7e592d8831f0ac72dcde;p=matches%2Fhonours.git

diff --git a/research/TCS/interface.py b/research/TCS/interface.py
index 869d11cc..eab484bc 100755
--- a/research/TCS/interface.py
+++ b/research/TCS/interface.py
@@ -37,7 +37,7 @@ aquire = { "DAC_Sweep" : "0.0 + 50.0*int(step)", # DAC Sweep value (t is in STEP
 	#"ADC_Vi" : 5, # ADC channel to read back Vi (set by DAC) through
 	#"ADC_Is" : 4, # ADC channel to read back Is through
 	#"ADC_Ie" : 4, # ADC channel to read back Ie through
-	"DAC_Settle" : 1.0, # Time in seconds to wait for DAC to stabilise
+	"DAC_Settle" : 0.0, # Time in seconds to wait for DAC to stabilise
 	#"response_wait" : 0.2, # Time to wait in seconds between sending data and reading back
 	"start_date" : None,
 	"open_files" : []
@@ -45,7 +45,7 @@ aquire = { "DAC_Sweep" : "0.0 + 50.0*int(step)", # DAC Sweep value (t is in STEP
 
 #Setup the serial connection parameters
 ser = serial.Serial(
-	port="/dev/ttyUSB0", # Modify as needed (note: in linux need to run `sudo chmod a+rw /dev/ttyUSBX' to set permissions)
+	port="/dev/ttyUSB1", # Modify as needed (note: in linux need to run `sudo chmod a+rw /dev/ttyUSBX' to set permissions)
 
 	# Do not change the values below here (unless AVR butterfly is reprogrammed to use different values)
 	baudrate=4800,
@@ -207,7 +207,7 @@ def main():
 	sweep = 1
 	while True:
 		os.system("mkdir -p " + getDate())
-		record_data([4, 5], getDate()+"/"+str(getTime())+".dat", None, 4000)
+		record_data([4, 5, 0], getDate()+"/"+str(getTime())+".dat", None, 4000)
 		sweep += 1