X-Git-Url: https://git.ucc.asn.au/?a=blobdiff_plain;f=research%2FTCS%2Finterface.py;h=eab484bc5ff21e97de268097d6465efb6184a9cb;hb=93d5acb53e1348ba4e288874837fc6085b74f863;hp=b92890d2a8b40da250a3c0c2818ffa658e3b9fd9;hpb=184b02dc5f607e25887f8c0d96316dc0e1124994;p=matches%2Fhonours.git

diff --git a/research/TCS/interface.py b/research/TCS/interface.py
index b92890d2..eab484bc 100755
--- a/research/TCS/interface.py
+++ b/research/TCS/interface.py
@@ -32,12 +32,12 @@ calibrate = {
 }
 
 # TODO: Adjust aqcuisition parameters here
-aquire = { "DAC_Sweep" : "1500", # DAC Sweep value (t is in STEPS, not seconds!)
-	"ADC_Averages" : 200,
+aquire = { "DAC_Sweep" : "0.0 + 50.0*int(step)", # DAC Sweep value (t is in STEPS, not seconds!)
+	"ADC_Averages" : 2000,
 	#"ADC_Vi" : 5, # ADC channel to read back Vi (set by DAC) through
 	#"ADC_Is" : 4, # ADC channel to read back Is through
 	#"ADC_Ie" : 4, # ADC channel to read back Ie through
-	"DAC_Settle" : 1.0, # Time in seconds to wait for DAC to stabilise
+	"DAC_Settle" : 0.0, # Time in seconds to wait for DAC to stabilise
 	#"response_wait" : 0.2, # Time to wait in seconds between sending data and reading back
 	"start_date" : None,
 	"open_files" : []
@@ -45,7 +45,7 @@ aquire = { "DAC_Sweep" : "1500", # DAC Sweep value (t is in STEPS, not seconds!)
 
 #Setup the serial connection parameters
 ser = serial.Serial(
-	port="/dev/ttyUSB0", # Modify as needed (note: in linux need to run `sudo chmod a+rw /dev/ttyUSBX' to set permissions)
+	port="/dev/ttyUSB1", # Modify as needed (note: in linux need to run `sudo chmod a+rw /dev/ttyUSBX' to set permissions)
 
 	# Do not change the values below here (unless AVR butterfly is reprogrammed to use different values)
 	baudrate=4800,