X-Git-Url: https://git.ucc.asn.au/?a=blobdiff_plain;f=research%2FTCS%2Finterface.py;h=f5ee25dc41526e12b42a248fed0bf6f7a8b92c6d;hb=536c0980a760f27ff23e87b4f844e569b936b303;hp=54a8764d4f80766adc0d4fb26a169cff0f56f6af;hpb=753250a351df1e6557df59e72ba9f5b8f97b923a;p=matches%2Fhonours.git

diff --git a/research/TCS/interface.py b/research/TCS/interface.py
index 54a8764d..f5ee25dc 100755
--- a/research/TCS/interface.py
+++ b/research/TCS/interface.py
@@ -45,7 +45,7 @@ aquire = { "DAC_Sweep" : "1500.0",# + 50.0*int(step)", # DAC Sweep value (t is i
 
 #Setup the serial connection parameters
 ser = serial.Serial(
-	port="/dev/ttyUSB0", # Modify as needed (note: in linux need to run `sudo chmod a+rw /dev/ttyUSBX' to set permissions)
+	port="/dev/ttyUSB1", # Modify as needed (note: in linux need to run `sudo chmod a+rw /dev/ttyUSBX' to set permissions)
 
 	# Do not change the values below here (unless AVR butterfly is reprogrammed to use different values)
 	baudrate=4800,