X-Git-Url: https://git.ucc.asn.au/?a=blobdiff_plain;f=src%2Flink%2Fpexpect%2Fexamples%2Frippy.py;fp=src%2Flink%2Fpexpect%2Fexamples%2Frippy.py;h=0000000000000000000000000000000000000000;hb=edf8e5b569e75692d61a44f2c3241fb6410e4fbd;hp=13013552018796d4fc2d979f735679b2e7acffd4;hpb=35ff18a5beda685e59ca898026570d67b7ead333;p=progcomp10.git diff --git a/src/link/pexpect/examples/rippy.py b/src/link/pexpect/examples/rippy.py deleted file mode 100755 index 1301355..0000000 --- a/src/link/pexpect/examples/rippy.py +++ /dev/null @@ -1,984 +0,0 @@ -#!/usr/bin/env python - -"""Rippy! - -This script helps to convert video from one format to another. -This is useful for ripping DVD to mpeg4 video (XviD, DivX). - -Features: - * automatic crop detection - * mp3 audio compression with resampling options - * automatic bitrate calculation based on desired target size - * optional interlace removal, b/w video optimization, video scaling - -Run the script with no arguments to start with interactive prompts: - rippy.py -Run the script with the filename of a config to start automatic mode: - rippy.py rippy.conf - -After Rippy is finished it saves the current configuation in a file called -'rippy.conf' in the local directoy. This can be used to rerun process using the -exact same settings by passing the filename of the conf file as an argument to -Rippy. Rippy will read the options from the file instead of asking you for -options interactively. So if you run rippy with 'dry_run=1' then you can run -the process again later using the 'rippy.conf' file. Don't forget to edit -'rippy.conf' to set 'dry_run=0'! - -If you run rippy with 'dry_run' and 'verbose' true then the output generated is -valid command line commands. you could (in theory) cut-and-paste the commands -to a shell prompt. You will need to tweak some values such as crop area and bit -rate because these cannot be calculated in a dry run. This is useful if you -want to get an idea of what Rippy plans to do. - -For all the trouble that Rippy goes through to calculate the best bitrate for a -desired target video size it sometimes fails to get it right. Sometimes the -final video size will differ more than you wanted from the desired size, but if -you are really motivated and have a lot of time on your hands then you can run -Rippy again with a manually calculated bitrate. After all compression is done -the first time Rippy will recalculate the bitrate to give you the nearly exact -bitrate that would have worked. You can then edit the 'rippy.conf' file; set -the video_bitrate with this revised bitrate; and then run Rippy all over again. -There is nothing like 4-pass video compression to get it right! Actually, this -could be done in three passes since I don't need to do the second pass -compression before I calculate the revised bitrate. I'm also considering an -enhancement where Rippy would compress ten spread out chunks, 1-minute in -length to estimate the bitrate. - -Free, open source, and all that good stuff. -Rippy Copyright (c) 2006 Noah Spurrier - -Permission is hereby granted, free of charge, to any person obtaining a copy -of this software and associated documentation files (the "Software"), to deal -in the Software without restriction, including without limitation the rights -to use, copy, modify, merge, publish, distribute, sublicense, and/or sell -copies of the Software, and to permit persons to whom the Software is -furnished to do so, subject to the following conditions: - -The above copyright notice and this permission notice shall be included in all -copies or substantial portions of the Software. - -THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, -EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF -MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. -IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, -DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR -OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE -USE OR OTHER DEALINGS IN THE SOFTWARE. - -Noah Spurrier -$Id: rippy.py 498 2007-12-17 13:44:19Z noah $ -""" - -import sys, os, re, math, stat, getopt, traceback, types, time -import pexpect - -__version__ = '1.2' -__revision__ = '$Revision: 11 $' -__all__ = ['main', __version__, __revision__] - -GLOBAL_LOGFILE_NAME = "rippy_%d.log" % os.getpid() -GLOBAL_LOGFILE = open (GLOBAL_LOGFILE_NAME, "wb") - -############################################################################### -# This giant section defines the prompts and defaults used in interactive mode. -############################################################################### -# Python dictionaries are unordered, so -# I have this list that maintains the order of the keys. -prompts_key_order = ( -'verbose_flag', -'dry_run_flag', -'video_source_filename', -'video_chapter', -'video_final_filename', -'video_length', -'video_aspect_ratio', -'video_scale', -'video_encode_passes', -'video_codec', -'video_fourcc_override', -'video_bitrate', -'video_bitrate_overhead', -'video_target_size', -'video_crop_area', -'video_deinterlace_flag', -'video_gray_flag', -'subtitle_id', -'audio_id', -'audio_codec', -'audio_raw_filename', -'audio_volume_boost', -'audio_sample_rate', -'audio_bitrate', -#'audio_lowpass_filter', -'delete_tmp_files_flag' -) -# -# The 'prompts' dictionary holds all the messages shown to the user in -# interactive mode. The 'prompts' dictionary schema is defined as follows: -# prompt_key : ( default value, prompt string, help string, level of difficulty (0,1,2) ) -# -prompts = { -'video_source_filename':("dvd://1", 'video source filename?', """This is the filename of the video that you want to convert from. -It can be any file that mencoder supports. -You can also choose a DVD device using the dvd://1 syntax. -Title 1 is usually the main title on a DVD.""",0), -'video_chapter':("none",'video chapter?',"""This is the chapter number. Usually disks such as TV series seasons will be divided into chapters. Maybe be set to none.""",0), -'video_final_filename':("video_final.avi", "video final filename?", """This is the name of the final video.""",0), -'audio_raw_filename':("audiodump.wav", "audio raw filename?", """This is the audio raw PCM filename. This is prior to compression. -Note that mplayer automatically names this audiodump.wav, so don't change this.""",1000), -#'audio_compressed_filename':("audiodump.mp3","Audio compressed filename?", """This is the name of the compressed audio that will be mixed -#into the final video. Normally you don't need to change this.""",2), -'video_length':("none","video length in seconds?","""This sets the length of the video in seconds. This is used to estimate the -bitrate for a target video file size. Set to 'calc' to have Rippy calculate -the length. Set to 'none' if you don't want rippy to estimate the bitrate -- -you will have to manually specify bitrate.""",1), -'video_aspect_ratio':("calc","aspect ratio?","""This sets the aspect ratio of the video. Most DVDs are 16/9 or 4/3.""",1), -'video_scale':("none","video scale?","""This scales the video to the given output size. The default is to do no scaling. -You may type in a resolution such as 320x240 or you may use presets. - qntsc: 352x240 (NTSC quarter screen) - qpal: 352x288 (PAL quarter screen) - ntsc: 720x480 (standard NTSC) - pal: 720x576 (standard PAL) - sntsc: 640x480 (square pixel NTSC) - spal: 768x576 (square pixel PAL)""",1), -'video_codec':("mpeg4","video codec?","""This is the video compression to use. This is passed directly to mencoder, so -any format that it recognizes should work. For XviD or DivX use mpeg4. -Almost all MS Windows systems support wmv2 out of the box. -Some common codecs include: -mjpeg, h263, h263p, h264, mpeg4, msmpeg4, wmv1, wmv2, mpeg1video, mpeg2video, huffyuv, ffv1. -""",2), -'audio_codec':("mp3","audio codec?","""This is the audio compression to use. This is passed directly to mencoder, so -any format that it recognizes will work. -Some common codecs include: -mp3, mp2, aac, pcm -See mencoder manual for details.""",2), -'video_fourcc_override':("XVID","force fourcc code?","""This forces the fourcc codec to the given value. XVID is safest for Windows. -The following are common fourcc values: - FMP4 - This is the mencoder default. This is the "real" value. - XVID - used by Xvid (safest) - DX50 - - MP4S - Microsoft""",2), -'video_encode_passes':("1","number of encode passes?","""This sets how many passes to use to encode the video. You can choose 1 or 2. -Using two pases takes twice as long as one pass, but produces a better -quality video. I found that the improvement is not that impressive.""",1), -'verbose_flag':("Y","verbose output?","""This sets verbose output. If true then all commands and arguments are printed -before they are run. This is useful to see exactly how commands are run.""",1), -'dry_run_flag':("N","dry run?","""This sets 'dry run' mode. If true then commands are not run. This is useful -if you want to see what would the script would do.""",1), -'video_bitrate':("calc","video bitrate?","""This sets the video bitrate. This overrides video_target_size. -Set to 'calc' to automatically estimate the bitrate based on the -video final target size. If you set video_length to 'none' then -you will have to specify this video_bitrate.""",1), -'video_target_size':("737280000","video final target size?","""This sets the target video size that you want to end up with. -This is over-ridden by video_bitrate. In other words, if you specify -video_bitrate then video_target_size is ignored. -Due to the unpredictable nature of VBR compression the final video size -may not exactly match. The following are common CDR sizes: - 180MB CDR (21 minutes) holds 193536000 bytes - 550MB CDR (63 minutes) holds 580608000 bytes - 650MB CDR (74 minutes) holds 681984000 bytes - 700MB CDR (80 minutes) holds 737280000 bytes""",0), -'video_bitrate_overhead':("1.0","bitrate overhead factor?","""Adjust this value if you want to leave more room for -other files such as subtitle files. -If you specify video_bitrate then this value is ignored.""",2), -'video_crop_area':("detect","crop area?","""This sets the crop area to remove black bars from the top or sides of the video. -This helps save space. Set to 'detect' to automatically detect the crop area. -Set to 'none' to not crop the video. Normally you don't need to change this.""",1), -'video_deinterlace_flag':("N","is the video interlaced?","""This sets the deinterlace flag. If set then mencoder will be instructed -to filter out interlace artifacts (using '-vf pp=md').""",1), -'video_gray_flag':("N","is the video black and white (gray)?","""This improves output for black and white video.""",1), -'subtitle_id':("None","Subtitle ID stream?","""This selects the subtitle stream to extract from the source video. -Normally, 0 is the English subtitle stream for a DVD. -Subtitles IDs with higher numbers may be other languages.""",1), -'audio_id':("128","audio ID stream?","""This selects the audio stream to extract from the source video. -If your source is a VOB file (DVD) then stream IDs start at 128. -Normally, 128 is the main audio track for a DVD. -Tracks with higher numbers may be other language dubs or audio commentary.""",1), -'audio_sample_rate':("32000","audio sample rate (Hz) 48000, 44100, 32000, 24000, 12000","""This sets the rate at which the compressed audio will be resampled. -DVD audio is 48 kHz whereas music CDs use 44.1 kHz. The higher the sample rate -the more space the audio track will take. That will leave less space for video. -32 kHz is a good trade-off if you are trying to fit a video onto a CD.""",1), -'audio_bitrate':("96","audio bitrate (kbit/s) 192, 128, 96, 64?","""This sets the bitrate for MP3 audio compression. -The higher the bitrate the more space the audio track will take. -That will leave less space for video. Most people find music to be acceptable -at 128 kBitS. 96 kBitS is a good trade-off if you are trying to fit a video onto a CD.""",1), -'audio_volume_boost':("none","volume dB boost?","""Many DVDs have very low audio volume. This sets an audio volume boost in Decibels. -Values of 6 to 10 usually adjust quiet DVDs to a comfortable level.""",1), -#'audio_lowpass_filter':("16","audio lowpass filter (kHz)?","""This sets the low-pass filter for the audio. -#Normally this should be half of the audio sample rate. -#This improves audio compression and quality. -#Normally you don't need to change this.""",1), -'delete_tmp_files_flag':("N","delete temporary files when finished?","""If Y then %s, audio_raw_filename, and 'divx2pass.log' will be deleted at the end."""%GLOBAL_LOGFILE_NAME,1) -} - -############################################################################## -# This is the important convert control function -############################################################################## -def convert (options): - """This is the heart of it all -- this performs an end-to-end conversion of - a video from one format to another. It requires a dictionary of options. - The conversion process will also add some keys to the dictionary - such as length of the video and crop area. The dictionary is returned. - This options dictionary could be used again to repeat the convert process - (it is also saved to rippy.conf as text). - """ - if options['subtitle_id'] is not None: - print "# extract subtitles" - apply_smart (extract_subtitles, options) - else: - print "# do not extract subtitles." - - # Optimization - # I really only need to calculate the exact video length if the user - # selected 'calc' for video_bitrate - # or - # selected 'detect' for video_crop_area. - if options['video_bitrate']=='calc' or options['video_crop_area']=='detect': - # As strange as it seems, the only reliable way to calculate the length - # of a video (in seconds) is to extract the raw, uncompressed PCM audio stream - # and then calculate the length of that. This is because MP4 video is VBR, so - # you cannot get exact time based on compressed size. - if options['video_length']=='calc': - print "# extract PCM raw audio to %s" % (options['audio_raw_filename']) - apply_smart (extract_audio, options) - options['video_length'] = apply_smart (get_length, options) - print "# Length of raw audio file : %d seconds (%0.2f minutes)" % (options['video_length'], float(options['video_length'])/60.0) - if options['video_bitrate']=='calc': - options['video_bitrate'] = options['video_bitrate_overhead'] * apply_smart (calc_video_bitrate, options) - print "# video bitrate : " + str(options['video_bitrate']) - if options['video_crop_area']=='detect': - options['video_crop_area'] = apply_smart (crop_detect, options) - print "# crop area : " + str(options['video_crop_area']) - print "# compression estimate" - print apply_smart (compression_estimate, options) - - print "# compress video" - apply_smart (compress_video, options) - 'audio_volume_boost', - - print "# delete temporary files:", - if options['delete_tmp_files_flag']: - print "yes" - apply_smart (delete_tmp_files, options) - else: - print "no" - - # Finish by saving options to rippy.conf and - # calclating if final_size is less than target_size. - o = ["# options used to create video\n"] - video_actual_size = get_filesize (options['video_final_filename']) - if options['video_target_size'] != 'none': - revised_bitrate = calculate_revised_bitrate (options['video_bitrate'], options['video_target_size'], video_actual_size) - o.append("# revised video_bitrate : %d\n" % revised_bitrate) - for k,v in options.iteritems(): - o.append (" %30s : %s\n" % (k, v)) - print '# '.join(o) - fout = open("rippy.conf","wb").write(''.join(o)) - print "# final actual video size = %d" % video_actual_size - if options['video_target_size'] != 'none': - if video_actual_size > options['video_target_size']: - print "# FINAL VIDEO SIZE IS GREATER THAN DESIRED TARGET" - print "# final video size is %d bytes over target size" % (video_actual_size - options['video_target_size']) - else: - print "# final video size is %d bytes under target size" % (options['video_target_size'] - video_actual_size) - print "# If you want to run the entire compression process all over again" - print "# to get closer to the target video size then trying using a revised" - print "# video_bitrate of %d" % revised_bitrate - - return options - -############################################################################## - -def exit_with_usage(exit_code=1): - print globals()['__doc__'] - print 'version:', globals()['__version__'] - sys.stdout.flush() - os._exit(exit_code) - -def check_missing_requirements (): - """This list of missing requirements (mencoder, mplayer, lame, and mkvmerge). - Returns None if all requirements are in the execution path. - """ - missing = [] - if pexpect.which("mencoder") is None: - missing.append("mencoder") - if pexpect.which("mplayer") is None: - missing.append("mplayer") - #if pexpect.which("lame") is None: - # missing.append("lame") - #if pexpect.which("mkvmerge") is None: - # missing.append("mkvmerge") - if len(missing)==0: - return None - return missing - -def input_option (message, default_value="", help=None, level=0, max_level=0): - """This is a fancy raw_input function. - If the user enters '?' then the contents of help is printed. - - The 'level' and 'max_level' are used to adjust which advanced options - are printed. 'max_level' is the level of options that the user wants - to see. 'level' is the level of difficulty for this particular option. - If this level is <= the max_level the user wants then the - message is printed and user input is allowed; otherwise, the - default value is returned automatically without user input. - """ - if default_value != '': - message = "%s [%s] " % (message, default_value) - if level > max_level: - return default_value - while 1: - user_input = raw_input (message) - if user_input=='?': - print help - elif user_input=='': - return default_value - else: - break - return user_input - -def progress_callback (d=None): - """This callback simply prints a dot to show activity. - This is used when running external commands with pexpect.run. - """ - sys.stdout.write (".") - sys.stdout.flush() - -def run(cmd): - global GLOBAL_LOGFILE - print >>GLOBAL_LOGFILE, cmd - (command_output, exitstatus) = pexpect.run(cmd, events={pexpect.TIMEOUT:progress_callback}, timeout=5, withexitstatus=True, logfile=GLOBAL_LOGFILE) - if exitstatus != 0: - print "RUN FAILED. RETURNED EXIT STATUS:", exitstatus - print >>GLOBAL_LOGFILE, "RUN FAILED. RETURNED EXIT STATUS:", exitstatus - return (command_output, exitstatus) - -def apply_smart (func, args): - """This is similar to func(**args), but this won't complain about - extra keys in 'args'. This ignores keys in 'args' that are - not required by 'func'. This passes None to arguments that are - not defined in 'args'. That's fine for arguments with a default valeue, but - that's a bug for required arguments. I should probably raise a TypeError. - The func parameter can be a function reference or a string. - If it is a string then it is converted to a function reference. - """ - if type(func) is type(''): - if func in globals(): - func = globals()[func] - else: - raise NameError("name '%s' is not defined" % func) - if hasattr(func,'im_func'): # Handle case when func is a class method. - func = func.im_func - argcount = func.func_code.co_argcount - required_args = dict([(k,args.get(k)) for k in func.func_code.co_varnames[:argcount]]) - return func(**required_args) - -def count_unique (items): - """This takes a list and returns a sorted list of tuples with a count of each unique item in the list. - Example 1: - count_unique(['a','b','c','a','c','c','a','c','c']) - returns: - [(5,'c'), (3,'a'), (1,'b')] - Example 2 -- get the most frequent item in a list: - count_unique(['a','b','c','a','c','c','a','c','c'])[0][1] - returns: - 'c' - """ - stats = {} - for i in items: - if i in stats: - stats[i] = stats[i] + 1 - else: - stats[i] = 1 - stats = [(v, k) for k, v in stats.items()] - stats.sort() - stats.reverse() - return stats - -def calculate_revised_bitrate (video_bitrate, video_target_size, video_actual_size): - """This calculates a revised video bitrate given the video_bitrate used, - the actual size that resulted, and the video_target_size. - This can be used if you want to compress the video all over again in an - attempt to get closer to the video_target_size. - """ - return int(math.floor(video_bitrate * (float(video_target_size) / float(video_actual_size)))) - -def get_aspect_ratio (video_source_filename): - """This returns the aspect ratio of the original video. - This is usualy 1.78:1(16/9) or 1.33:1(4/3). - This function is very lenient. It basically guesses 16/9 whenever - it cannot figure out the aspect ratio. - """ - cmd = "mplayer '%s' -vo png -ao null -frames 1" % video_source_filename - (command_output, exitstatus) = run(cmd) - ar = re.findall("Movie-Aspect is ([0-9]+\.?[0-9]*:[0-9]+\.?[0-9]*)", command_output) - if len(ar)==0: - return '16/9' - if ar[0] == '1.78:1': - return '16/9' - if ar[0] == '1.33:1': - return '4/3' - return '16/9' - #idh = re.findall("ID_VIDEO_HEIGHT=([0-9]+)", command_output) - #if len(idw)==0 or len(idh)==0: - # print 'WARNING!' - # print 'Could not get aspect ration. Assuming 1.78:1 (16/9).' - # return 1.78 - #return float(idw[0])/float(idh[0]) -#ID_VIDEO_WIDTH=720 -#ID_VIDEO_HEIGHT=480 -#Movie-Aspect is 1.78:1 - prescaling to correct movie aspect. - - -def get_aid_list (video_source_filename): - """This returns a list of audio ids in the source video file. - TODO: Also extract ID_AID_nnn_LANG to associate language. Not all DVDs include this. - """ - cmd = "mplayer '%s' -vo null -ao null -frames 0 -identify" % video_source_filename - (command_output, exitstatus) = run(cmd) - idl = re.findall("ID_AUDIO_ID=([0-9]+)", command_output) - idl.sort() - return idl - -def get_sid_list (video_source_filename): - """This returns a list of subtitle ids in the source video file. - TODO: Also extract ID_SID_nnn_LANG to associate language. Not all DVDs include this. - """ - cmd = "mplayer '%s' -vo null -ao null -frames 0 -identify" % video_source_filename - (command_output, exitstatus) = run(cmd) - idl = re.findall("ID_SUBTITLE_ID=([0-9]+)", command_output) - idl.sort() - return idl - -def extract_audio (video_source_filename, audio_id=128, verbose_flag=0, dry_run_flag=0): - """This extracts the given audio_id track as raw uncompressed PCM from the given source video. - Note that mplayer always saves this to audiodump.wav. - At this time there is no way to set the output audio name. - """ - #cmd = "mplayer %(video_source_filename)s -vc null -vo null -aid %(audio_id)s -ao pcm:fast -noframedrop" % locals() - cmd = "mplayer -quiet '%(video_source_filename)s' -vc dummy -vo null -aid %(audio_id)s -ao pcm:fast -noframedrop" % locals() - if verbose_flag: print cmd - if not dry_run_flag: - run(cmd) - print - -def extract_subtitles (video_source_filename, subtitle_id=0, verbose_flag=0, dry_run_flag=0): - """This extracts the given subtitle_id track as VOBSUB format from the given source video. - """ - cmd = "mencoder -quiet '%(video_source_filename)s' -o /dev/null -nosound -ovc copy -vobsubout subtitles -vobsuboutindex 0 -sid %(subtitle_id)s" % locals() - if verbose_flag: print cmd - if not dry_run_flag: - run(cmd) - print - -def get_length (audio_raw_filename): - """This attempts to get the length of the media file (length is time in seconds). - This should not be confused with size (in bytes) of the file data. - This is best used on a raw PCM AUDIO file because mplayer cannot get an accurate - time for many compressed video and audio formats -- notably MPEG4 and MP3. - Weird... - This returns -1 if it cannot get the length of the given file. - """ - cmd = "mplayer %s -vo null -ao null -frames 0 -identify" % audio_raw_filename - (command_output, exitstatus) = run(cmd) - idl = re.findall("ID_LENGTH=([0-9.]*)", command_output) - idl.sort() - if len(idl) != 1: - print "ERROR: cannot get length of raw audio file." - print "command_output of mplayer identify:" - print command_output - print "parsed command_output:" - print str(idl) - return -1 - return float(idl[0]) - -def get_filesize (filename): - """This returns the number of bytes a file takes on storage.""" - return os.stat(filename)[stat.ST_SIZE] - -def calc_video_bitrate (video_target_size, audio_bitrate, video_length, extra_space=0, dry_run_flag=0): - """This gives an estimate of the video bitrate necessary to - fit the final target size. This will take into account room to - fit the audio and extra space if given (for container overhead or whatnot). - video_target_size is in bytes, - audio_bitrate is bits per second (96, 128, 256, etc.) ASSUMING CBR, - video_length is in seconds, - extra_space is in bytes. - a 180MB CDR (21 minutes) holds 193536000 bytes. - a 550MB CDR (63 minutes) holds 580608000 bytes. - a 650MB CDR (74 minutes) holds 681984000 bytes. - a 700MB CDR (80 minutes) holds 737280000 bytes. - """ - if dry_run_flag: - return -1 - if extra_space is None: extra_space = 0 - #audio_size = os.stat(audio_compressed_filename)[stat.ST_SIZE] - audio_size = (audio_bitrate * video_length * 1000) / 8.0 - video_target_size = video_target_size - audio_size - extra_space - return (int)(calc_video_kbitrate (video_target_size, video_length)) - -def calc_video_kbitrate (target_size, length_secs): - """Given a target byte size free for video data, this returns the bitrate in kBit/S. - For mencoder vbitrate 1 kBit = 1000 Bits -- not 1024 bits. - target_size = bitrate * 1000 * length_secs / 8 - target_size = bitrate * 125 * length_secs - bitrate = target_size/(125*length_secs) - """ - return int(target_size / (125.0 * length_secs)) - -def crop_detect (video_source_filename, video_length, dry_run_flag=0): - """This attempts to figure out the best crop for the given video file. - Basically it runs crop detect for 10 seconds on five different places in the video. - It picks the crop area that was most often detected. - """ - skip = int(video_length/9) # offset to skip (-ss option in mencoder) - sample_length = 10 - cmd1 = "mencoder '%s' -quiet -ss %d -endpos %d -o /dev/null -nosound -ovc lavc -vf cropdetect" % (video_source_filename, skip, sample_length) - cmd2 = "mencoder '%s' -quiet -ss %d -endpos %d -o /dev/null -nosound -ovc lavc -vf cropdetect" % (video_source_filename, 2*skip, sample_length) - cmd3 = "mencoder '%s' -quiet -ss %d -endpos %d -o /dev/null -nosound -ovc lavc -vf cropdetect" % (video_source_filename, 4*skip, sample_length) - cmd4 = "mencoder '%s' -quiet -ss %d -endpos %d -o /dev/null -nosound -ovc lavc -vf cropdetect" % (video_source_filename, 6*skip, sample_length) - cmd5 = "mencoder '%s' -quiet -ss %d -endpos %d -o /dev/null -nosound -ovc lavc -vf cropdetect" % (video_source_filename, 8*skip, sample_length) - if dry_run_flag: - return "0:0:0:0" - (command_output1, exitstatus1) = run(cmd1) - (command_output2, exitstatus2) = run(cmd2) - (command_output3, exitstatus3) = run(cmd3) - (command_output4, exitstatus4) = run(cmd4) - (command_output5, exitstatus5) = run(cmd5) - idl = re.findall("-vf crop=([0-9]+:[0-9]+:[0-9]+:[0-9]+)", command_output1) - idl = idl + re.findall("-vf crop=([0-9]+:[0-9]+:[0-9]+:[0-9]+)", command_output2) - idl = idl + re.findall("-vf crop=([0-9]+:[0-9]+:[0-9]+:[0-9]+)", command_output3) - idl = idl + re.findall("-vf crop=([0-9]+:[0-9]+:[0-9]+:[0-9]+)", command_output4) - idl = idl + re.findall("-vf crop=([0-9]+:[0-9]+:[0-9]+:[0-9]+)", command_output5) - items_count = count_unique(idl) - return items_count[0][1] - - -def build_compression_command (video_source_filename, video_final_filename, video_target_size, audio_id=128, video_bitrate=1000, video_codec='mpeg4', audio_codec='mp3', video_fourcc_override='FMP4', video_gray_flag=0, video_crop_area=None, video_aspect_ratio='16/9', video_scale=None, video_encode_passes=2, video_deinterlace_flag=0, audio_volume_boost=None, audio_sample_rate=None, audio_bitrate=None, seek_skip=None, seek_length=None, video_chapter=None): -#Notes:For DVD, VCD, and SVCD use acodec=mp2 and vcodec=mpeg2video: -#mencoder movie.avi -o movie.VOB -ovc lavc -oac lavc -lavcopts acodec=mp2:abitrate=224:vcodec=mpeg2video:vbitrate=2000 - - # - # build video filter (-vf) argument - # - video_filter = '' - if video_crop_area and video_crop_area.lower()!='none': - video_filter = video_filter + 'crop=%s' % video_crop_area - if video_deinterlace_flag: - if video_filter != '': - video_filter = video_filter + ',' - video_filter = video_filter + 'pp=md' - if video_scale and video_scale.lower()!='none': - if video_filter != '': - video_filter = video_filter + ',' - video_filter = video_filter + 'scale=%s' % video_scale - # optional video rotation -- were you holding your camera sideways? - #if video_filter != '': - # video_filter = video_filter + ',' - #video_filter = video_filter + 'rotate=2' - if video_filter != '': - video_filter = '-vf ' + video_filter - - # - # build chapter argument - # - if video_chapter is not None: - chapter = '-chapter %d-%d' %(video_chapter,video_chapter) - else: - chapter = '' -# chapter = '-chapter 2-2' - - # - # build audio_filter argument - # - audio_filter = '' - if audio_sample_rate: - if audio_filter != '': - audio_filter = audio_filter + ',' - audio_filter = audio_filter + 'lavcresample=%s' % audio_sample_rate - if audio_volume_boost is not None: - if audio_filter != '': - audio_filter = audio_filter + ',' - audio_filter = audio_filter + 'volume=%0.1f:1'%audio_volume_boost - if audio_filter != '': - audio_filter = '-af ' + audio_filter - # - #if audio_sample_rate: - # audio_filter = ('-srate %d ' % audio_sample_rate) + audio_filter - - # - # build lavcopts argument - # - #lavcopts = '-lavcopts vcodec=%s:vbitrate=%d:mbd=2:aspect=%s:acodec=%s:abitrate=%d:vpass=1' % (video_codec,video_bitrate,audio_codec,audio_bitrate) - lavcopts = '-lavcopts vcodec=%(video_codec)s:vbitrate=%(video_bitrate)d:mbd=2:aspect=%(video_aspect_ratio)s:acodec=%(audio_codec)s:abitrate=%(audio_bitrate)d:vpass=1' % (locals()) - if video_gray_flag: - lavcopts = lavcopts + ':gray' - - seek_filter = '' - if seek_skip is not None: - seek_filter = '-ss %s' % (str(seek_skip)) - if seek_length is not None: - seek_filter = seek_filter + ' -endpos %s' % (str(seek_length)) - - cmd = "mencoder -quiet -info comment='Arkivist' '%(video_source_filename)s' %(seek_filter)s %(chapter)s -aid %(audio_id)s -o '%(video_final_filename)s' -ffourcc %(video_fourcc_override)s -ovc lavc -oac lavc %(lavcopts)s %(video_filter)s %(audio_filter)s" % locals() - return cmd - -def compression_estimate (video_length, video_source_filename, video_final_filename, video_target_size, audio_id=128, video_bitrate=1000, video_codec='mpeg4', audio_codec='mp3', video_fourcc_override='FMP4', video_gray_flag=0, video_crop_area=None, video_aspect_ratio='16/9', video_scale=None, video_encode_passes=2, video_deinterlace_flag=0, audio_volume_boost=None, audio_sample_rate=None, audio_bitrate=None): - """This attempts to figure out the best compression ratio for a given set of compression options. - """ - # TODO Need to account for AVI overhead. - skip = int(video_length/9) # offset to skip (-ss option in mencoder) - sample_length = 10 - cmd1 = build_compression_command (video_source_filename, "compression_test_1.avi", video_target_size, audio_id, video_bitrate, video_codec, audio_codec, video_fourcc_override, video_gray_flag, video_crop_area, video_aspect_ratio, video_scale, video_encode_passes, video_deinterlace_flag, audio_volume_boost, audio_sample_rate, audio_bitrate, skip, sample_length) - cmd2 = build_compression_command (video_source_filename, "compression_test_2.avi", video_target_size, audio_id, video_bitrate, video_codec, audio_codec, video_fourcc_override, video_gray_flag, video_crop_area, video_aspect_ratio, video_scale, video_encode_passes, video_deinterlace_flag, audio_volume_boost, audio_sample_rate, audio_bitrate, skip*2, sample_length) - cmd3 = build_compression_command (video_source_filename, "compression_test_3.avi", video_target_size, audio_id, video_bitrate, video_codec, audio_codec, video_fourcc_override, video_gray_flag, video_crop_area, video_aspect_ratio, video_scale, video_encode_passes, video_deinterlace_flag, audio_volume_boost, audio_sample_rate, audio_bitrate, skip*4, sample_length) - cmd4 = build_compression_command (video_source_filename, "compression_test_4.avi", video_target_size, audio_id, video_bitrate, video_codec, audio_codec, video_fourcc_override, video_gray_flag, video_crop_area, video_aspect_ratio, video_scale, video_encode_passes, video_deinterlace_flag, audio_volume_boost, audio_sample_rate, audio_bitrate, skip*6, sample_length) - cmd5 = build_compression_command (video_source_filename, "compression_test_5.avi", video_target_size, audio_id, video_bitrate, video_codec, audio_codec, video_fourcc_override, video_gray_flag, video_crop_area, video_aspect_ratio, video_scale, video_encode_passes, video_deinterlace_flag, audio_volume_boost, audio_sample_rate, audio_bitrate, skip*8, sample_length) - run(cmd1) - run(cmd2) - run(cmd3) - run(cmd4) - run(cmd5) - size = get_filesize ("compression_test_1.avi")+get_filesize ("compression_test_2.avi")+get_filesize ("compression_test_3.avi")+get_filesize ("compression_test_4.avi")+get_filesize ("compression_test_5.avi") - return (size / 5.0) - -def compress_video (video_source_filename, video_final_filename, video_target_size, audio_id=128, video_bitrate=1000, video_codec='mpeg4', audio_codec='mp3', video_fourcc_override='FMP4', video_gray_flag=0, video_crop_area=None, video_aspect_ratio='16/9', video_scale=None, video_encode_passes=2, video_deinterlace_flag=0, audio_volume_boost=None, audio_sample_rate=None, audio_bitrate=None, seek_skip=None, seek_length=None, video_chapter=None, verbose_flag=0, dry_run_flag=0): - """This compresses the video and audio of the given source video filename to the transcoded filename. - This does a two-pass compression (I'm assuming mpeg4, I should probably make this smarter for other formats). - """ - # - # do the first pass video compression - # - #cmd = "mencoder -quiet '%(video_source_filename)s' -ss 65 -endpos 20 -aid %(audio_id)s -o '%(video_final_filename)s' -ffourcc %(video_fourcc_override)s -ovc lavc -oac lavc %(lavcopts)s %(video_filter)s %(audio_filter)s" % locals() - - cmd = build_compression_command (video_source_filename, video_final_filename, video_target_size, audio_id, video_bitrate, video_codec, audio_codec, video_fourcc_override, video_gray_flag, video_crop_area, video_aspect_ratio, video_scale, video_encode_passes, video_deinterlace_flag, audio_volume_boost, audio_sample_rate, audio_bitrate, seek_skip, seek_length, video_chapter) - if verbose_flag: print cmd - if not dry_run_flag: - run(cmd) - print - - # If not doing two passes then return early. - if video_encode_passes!='2': - return - - if verbose_flag: - video_actual_size = get_filesize (video_final_filename) - if video_actual_size > video_target_size: - print "=======================================================" - print "WARNING!" - print "First pass compression resulted in" - print "actual file size greater than target size." - print "Second pass will be too big." - print "=======================================================" - - # - # do the second pass video compression - # - cmd = cmd.replace ('vpass=1', 'vpass=2') - if verbose_flag: print cmd - if not dry_run_flag: - run(cmd) - print - return - -def compress_audio (audio_raw_filename, audio_compressed_filename, audio_lowpass_filter=None, audio_sample_rate=None, audio_bitrate=None, verbose_flag=0, dry_run_flag=0): - """This is depricated. - This compresses the raw audio file to the compressed audio filename. - """ - cmd = 'lame -h --athaa-sensitivity 1' # --cwlimit 11" - if audio_lowpass_filter: - cmd = cmd + ' --lowpass ' + audio_lowpass_filter - if audio_bitrate: - #cmd = cmd + ' --abr ' + audio_bitrate - cmd = cmd + ' --cbr -b ' + audio_bitrate - if audio_sample_rate: - cmd = cmd + ' --resample ' + audio_sample_rate - cmd = cmd + ' ' + audio_raw_filename + ' ' + audio_compressed_filename - if verbose_flag: print cmd - if not dry_run_flag: - (command_output, exitstatus) = run(cmd) - print - if exitstatus != 0: - raise Exception('ERROR: lame failed to compress raw audio file.') - -def mux (video_final_filename, video_transcoded_filename, audio_compressed_filename, video_container_format, verbose_flag=0, dry_run_flag=0): - """This is depricated. I used to use a three-pass encoding where I would mix the audio track separately, but - this never worked very well (loss of audio sync).""" - if video_container_format.lower() == 'mkv': # Matroska - mux_mkv (video_final_filename, video_transcoded_filename, audio_compressed_filename, verbose_flag, dry_run_flag) - if video_container_format.lower() == 'avi': - mux_avi (video_final_filename, video_transcoded_filename, audio_compressed_filename, verbose_flag, dry_run_flag) - -def mux_mkv (video_final_filename, video_transcoded_filename, audio_compressed_filename, verbose_flag=0, dry_run_flag=0): - """This is depricated.""" - cmd = 'mkvmerge -o %s --noaudio %s %s' % (video_final_filename, video_transcoded_filename, audio_compressed_filename) - if verbose_flag: print cmd - if not dry_run_flag: - run(cmd) - print - -def mux_avi (video_final_filename, video_transcoded_filename, audio_compressed_filename, verbose_flag=0, dry_run_flag=0): - """This is depricated.""" - cmd = "mencoder -quiet -oac copy -ovc copy -o '%s' -audiofile %s '%s'" % (video_final_filename, audio_compressed_filename, video_transcoded_filename) - if verbose_flag: print cmd - if not dry_run_flag: - run(cmd) - print - -def delete_tmp_files (audio_raw_filename, verbose_flag=0, dry_run_flag=0): - global GLOBAL_LOGFILE_NAME - file_list = ' '.join([GLOBAL_LOGFILE_NAME, 'divx2pass.log', audio_raw_filename ]) - cmd = 'rm -f ' + file_list - if verbose_flag: print cmd - if not dry_run_flag: - run(cmd) - print - -############################################################################## -# This is the interactive Q&A that is used if a conf file was not given. -############################################################################## -def interactive_convert (): - global prompts, prompts_key_order - - print globals()['__doc__'] - print - print "==============================================" - print " Enter '?' at any question to get extra help." - print "==============================================" - print - - # Ask for the level of options the user wants. - # A lot of code just to print a string! - level_sort = {0:'', 1:'', 2:''} - for k in prompts: - level = prompts[k][3] - if level < 0 or level > 2: - continue - level_sort[level] += " " + prompts[k][1] + "\n" - level_sort_string = "This sets the level for advanced options prompts. Set 0 for simple, 1 for advanced, or 2 for expert.\n" - level_sort_string += "[0] Basic options:\n" + str(level_sort[0]) + "\n" - level_sort_string += "[1] Advanced options:\n" + str(level_sort[1]) + "\n" - level_sort_string += "[2] Expert options:\n" + str(level_sort[2]) - c = input_option("Prompt level (0, 1, or 2)?", "1", level_sort_string) - max_prompt_level = int(c) - - options = {} - for k in prompts_key_order: - if k == 'video_aspect_ratio': - guess_aspect = get_aspect_ratio(options['video_source_filename']) - options[k] = input_option (prompts[k][1], guess_aspect, prompts[k][2], prompts[k][3], max_prompt_level) - elif k == 'audio_id': - aid_list = get_aid_list (options['video_source_filename']) - default_id = '128' - if max_prompt_level>=prompts[k][3]: - if len(aid_list) > 1: - print "This video has more than one audio stream. The following stream audio IDs were found:" - for aid in aid_list: - print " " + aid - default_id = aid_list[0] - else: - print "WARNING!" - print "Rippy was unable to get the list of audio streams from this video." - print "If reading directly from a DVD then the DVD device might be busy." - print "Using a default setting of stream id 128 (main audio on most DVDs)." - default_id = '128' - options[k] = input_option (prompts[k][1], default_id, prompts[k][2], prompts[k][3], max_prompt_level) - elif k == 'subtitle_id': - sid_list = get_sid_list (options['video_source_filename']) - default_id = 'None' - if max_prompt_level>=prompts[k][3]: - if len(sid_list) > 0: - print "This video has one or more subtitle streams. The following stream subtitle IDs were found:" - for sid in sid_list: - print " " + sid - #default_id = sid_list[0] - default_id = prompts[k][0] - else: - print "WARNING!" - print "Unable to get the list of subtitle streams from this video. It may have none." - print "Setting default to None." - default_id = 'None' - options[k] = input_option (prompts[k][1], default_id, prompts[k][2], prompts[k][3], max_prompt_level) - elif k == 'audio_lowpass_filter': - lowpass_default = "%.1f" % (math.floor(float(options['audio_sample_rate']) / 2.0)) - options[k] = input_option (prompts[k][1], lowpass_default, prompts[k][2], prompts[k][3], max_prompt_level) - elif k == 'video_bitrate': - if options['video_length'].lower() == 'none': - options[k] = input_option (prompts[k][1], '1000', prompts[k][2], prompts[k][3], max_prompt_level) - else: - options[k] = input_option (prompts[k][1], prompts[k][0], prompts[k][2], prompts[k][3], max_prompt_level) - else: - # don't bother asking for video_target_size or video_bitrate_overhead if video_bitrate was set - if (k=='video_target_size' or k=='video_bitrate_overhead') and options['video_bitrate']!='calc': - continue - # don't bother with crop area if video length is none - if k == 'video_crop_area' and options['video_length'].lower() == 'none': - options['video_crop_area'] = 'none' - continue - options[k] = input_option (prompts[k][1], prompts[k][0], prompts[k][2], prompts[k][3], max_prompt_level) - - #options['video_final_filename'] = options['video_final_filename'] + "." + options['video_container_format'] - - print "==========================================================================" - print "Ready to Rippy!" - print - print "The following options will be used:" - for k,v in options.iteritems(): - print "%27s : %s" % (k, v) - - print - c = input_option("Continue?", "Y") - c = c.strip().lower() - if c[0] != 'y': - print "Exiting..." - os._exit(1) - return options - -def clean_options (d): - """This validates and cleans up the options dictionary. - After reading options interactively or from a conf file - we need to make sure that the values make sense and are - converted to the correct type. - 1. Any key with "_flag" in it becomes a boolean True or False. - 2. Values are normalized ("No", "None", "none" all become "none"; - "Calcluate", "c", "CALC" all become "calc"). - 3. Certain values are converted from string to int. - 4. Certain combinations of options are invalid or override each other. - This is a rather annoying function, but then so it most cleanup work. - """ - for k in d: - d[k] = d[k].strip() - # convert all flag options to 0 or 1 - if '_flag' in k: - if type(d[k]) is types.StringType: - if d[k].strip().lower()[0] in 'yt1': #Yes, True, 1 - d[k] = 1 - else: - d[k] = 0 - d['video_bitrate'] = d['video_bitrate'].lower() - if d['video_bitrate'][0]=='c': - d['video_bitrate']='calc' - else: - d['video_bitrate'] = int(float(d['video_bitrate'])) - try: - d['video_target_size'] = int(d['video_target_size']) - # shorthand magic numbers get automatically expanded - if d['video_target_size'] == 180: - d['video_target_size'] = 193536000 - elif d['video_target_size'] == 550: - d['video_target_size'] = 580608000 - elif d['video_target_size'] == 650: - d['video_target_size'] = 681984000 - elif d['video_target_size'] == 700: - d['video_target_size'] = 737280000 - except: - d['video_target_size'] = 'none' - - try: - d['video_chapter'] = int(d['video_chapter']) - except: - d['video_chapter'] = None - - try: - d['subtitle_id'] = int(d['subtitle_id']) - except: - d['subtitle_id'] = None - - try: - d['video_bitrate_overhead'] = float(d['video_bitrate_overhead']) - except: - d['video_bitrate_overhead'] = -1.0 - - d['audio_bitrate'] = int(d['audio_bitrate']) - d['audio_sample_rate'] = int(d['audio_sample_rate']) - d['audio_volume_boost'] = d['audio_volume_boost'].lower() - if d['audio_volume_boost'][0]=='n': - d['audio_volume_boost'] = None - else: - d['audio_volume_boost'] = d['audio_volume_boost'].replace('db','') - d['audio_volume_boost'] = float(d['audio_volume_boost']) - -# assert (d['video_bitrate']=='calc' and d['video_target_size']!='none') -# or (d['video_bitrate']!='calc' and d['video_target_size']=='none') - - d['video_scale'] = d['video_scale'].lower() - if d['video_scale'][0]=='n': - d['video_scale']='none' - else: - al = re.findall("([0-9]+).*?([0-9]+)", d['video_scale']) - d['video_scale']=al[0][0]+':'+al[0][1] - d['video_crop_area'] = d['video_crop_area'].lower() - if d['video_crop_area'][0]=='n': - d['video_crop_area']='none' - d['video_length'] = d['video_length'].lower() - if d['video_length'][0]=='c': - d['video_length']='calc' - elif d['video_length'][0]=='n': - d['video_length']='none' - else: - d['video_length'] = int(float(d['video_length'])) - if d['video_length']==0: - d['video_length'] = 'none' - assert (not (d['video_length']=='none' and d['video_bitrate']=='calc')) - return d - -def main (): - try: - optlist, args = getopt.getopt(sys.argv[1:], 'h?', ['help','h','?']) - except Exception, e: - print str(e) - exit_with_usage() - command_line_options = dict(optlist) - # There are a million ways to cry for help. These are but a few of them. - if [elem for elem in command_line_options if elem in ['-h','--h','-?','--?','--help']]: - exit_with_usage(0) - - missing = check_missing_requirements() - if missing is not None: - print - print "==========================================================================" - print "ERROR!" - print "Some required external commands are missing." - print "please install the following packages:" - print str(missing) - print "==========================================================================" - print - c = input_option("Continue?", "Y") - c = c.strip().lower() - if c[0] != 'y': - print "Exiting..." - os._exit(1) - - if len(args) > 0: - # cute one-line string-to-dictionary parser (two-lines if you count this comment): - options = dict(re.findall('([^: \t\n]*)\s*:\s*(".*"|[^ \t\n]*)', file(args[0]).read())) - options = clean_options(options) - convert (options) - else: - options = interactive_convert () - options = clean_options(options) - convert (options) - print "# Done!" - -if __name__ == "__main__": - try: - start_time = time.time() - print time.asctime() - main() - print time.asctime() - print "TOTAL TIME IN MINUTES:", - print (time.time() - start_time) / 60.0 - except Exception, e: - tb_dump = traceback.format_exc() - print "==========================================================================" - print "ERROR -- Unexpected exception in script." - print str(e) - print str(tb_dump) - print "==========================================================================" - print >>GLOBAL_LOGFILE, "==========================================================================" - print >>GLOBAL_LOGFILE, "ERROR -- Unexpected exception in script." - print >>GLOBAL_LOGFILE, str(e) - print >>GLOBAL_LOGFILE, str(tb_dump) - print >>GLOBAL_LOGFILE, "==========================================================================" - exit_with_usage(3) -