3 - Curves have changed as before overnight
4 - Maybe the act of evaporating "resets" the curve?
5 - Try turning the sample holder around, wait ~1hour, turn back and see if curve changes
6 - Control, before turning around: 101738.dat
7 - Now we play the waiting game
8 - Turn around at 112621.dat
9 - Curves appear very similar
10 => Conclude that the change in curve is due to the deposition of the Au layers
12 - Try deposition of more Au
13 - This time increase current. Previous depositions are too slow. 4.6A not enough?
14 - Odd, because normally 3.5A is enough to be able to visibly see deposition after ~30min
15 - The Au ball is not on the apex of the Tungsten wire; it is not receiving as much heat
16 - Hopefully increasing the current will not destroy the filament
18 - Curve shifts leftways then slowly shifts back
20 - There are "double peaks" in the slope
21 - Maybe I can focus the gun to get rid of them?
22 - I did this already on 2012-09-27... but they came back!
24 - Succeeded in getting "nice" curve, but current is 1x less!
27 - OK.... take control curves