+ int IF;
+ int cpu = GetCPUNum() + 1;
+
+ // Save interrupt state
+ __ASM__ ("pushf;\n\tpop %0" : "=r"(IF));
+ IF &= 0x200; // AND out all but the interrupt flag
+
+ #if TRACE_LOCKS
+ if( Lock != &glDebug_Lock && Lock != &glThreadListLock )
+ {
+ //Log_Log("LOCK", "%p locked by %p", Lock, __builtin_return_address(0));
+ Debug("%p obtaining %p (Called by %p)", __builtin_return_address(0), Lock, __builtin_return_address(1));
+ }
+ #endif
+
+ __ASM__("cli");
+
+ // Wait for another CPU to release
+ __ASM__(
+ "1: lock cmpxchgl %2, (%3)\n\t"
+ "jnz 1b"
+ : "=a"(v)
+ : "a"(0), "r"(cpu), "r"(&Lock->Lock)
+ );
+
+ Lock->IF = IF;
+
+ #if TRACE_LOCKS
+ if( Lock != &glDebug_Lock && Lock != &glThreadListLock )
+ {
+ //Log_Log("LOCK", "%p locked by %p", Lock, __builtin_return_address(0));
+ //Debug("Lock %p locked by %p\t%p", Lock, __builtin_return_address(0), __builtin_return_address(1));
+ Debug("got it");
+ }
+ #endif
+}
+/**
+ * \brief Release a short lock
+ * \param Lock Lock pointer
+ */
+void SHORTREL(struct sShortSpinlock *Lock)
+{
+ #if TRACE_LOCKS
+ if( Lock != &glDebug_Lock && Lock != &glThreadListLock )
+ {
+ //Log_Log("LOCK", "%p released by %p", Lock, __builtin_return_address(0));
+ Debug("Lock %p released by %p\t%p", Lock, __builtin_return_address(0), __builtin_return_address(1));
+ }
+ #endif
+
+ // Lock->IF can change anytime once Lock->Lock is zeroed
+ if(Lock->IF) {
+ Lock->Lock = 0;
+ __ASM__ ("sti");
+ }
+ else {
+ Lock->Lock = 0;
+ }
+}
+
+// === DEBUG IO ===
+#if USE_GDB_STUB
+int putDebugChar(char ch)
+{
+ if(!gbGDB_SerialSetup) {
+ outb(GDB_SERIAL_PORT + 1, 0x00); // Disable all interrupts
+ outb(GDB_SERIAL_PORT + 3, 0x80); // Enable DLAB (set baud rate divisor)
+ outb(GDB_SERIAL_PORT + 0, 0x0C); // Set divisor to 12 (lo byte) 9600 baud
+ outb(GDB_SERIAL_PORT + 1, 0x00); // (base is (hi byte)
+ outb(GDB_SERIAL_PORT + 3, 0x03); // 8 bits, no parity, one stop bit (8N1)
+ outb(GDB_SERIAL_PORT + 2, 0xC7); // Enable FIFO with 14-byte threshold and clear it
+ outb(GDB_SERIAL_PORT + 4, 0x0B); // IRQs enabled, RTS/DSR set
+ gbGDB_SerialSetup = 1;
+ }
+ while( (inb(GDB_SERIAL_PORT + 5) & 0x20) == 0 );
+ outb(GDB_SERIAL_PORT, ch);
+ return 0;
+}
+int getDebugChar(void)
+{
+ if(!gbGDB_SerialSetup) {
+ outb(GDB_SERIAL_PORT + 1, 0x00); // Disable all interrupts
+ outb(GDB_SERIAL_PORT + 3, 0x80); // Enable DLAB (set baud rate divisor)
+ outb(GDB_SERIAL_PORT + 0, 0x0C); // Set divisor to 12 (lo byte) 9600 baud
+ outb(GDB_SERIAL_PORT + 1, 0x00); // (hi byte)
+ outb(GDB_SERIAL_PORT + 3, 0x03); // 8 bits, no parity, one stop bit
+ outb(GDB_SERIAL_PORT + 2, 0xC7); // Enable FIFO with 14-byte threshold and clear it
+ outb(GDB_SERIAL_PORT + 4, 0x0B); // IRQs enabled, RTS/DSR set
+ gbGDB_SerialSetup = 1;
+ }
+ while( (inb(GDB_SERIAL_PORT + 5) & 1) == 0) ;
+ return inb(GDB_SERIAL_PORT);
+}
+#endif /* USE_GDB_STUB */
+
+void Debug_PutCharDebug(char ch)
+{
+ #if DEBUG_TO_E9
+ __asm__ __volatile__ ( "outb %%al, $0xe9" :: "a"(((Uint8)ch)) );
+ #endif
+
+ #if DEBUG_TO_SERIAL
+ if(!gbDebug_SerialSetup) {
+ outb(SERIAL_PORT + 1, 0x00); // Disable all interrupts
+ outb(SERIAL_PORT + 3, 0x80); // Enable DLAB (set baud rate divisor)
+ outb(SERIAL_PORT + 0, 0x0C); // Set divisor to 12 (lo byte) 9600 baud
+ outb(SERIAL_PORT + 1, 0x00); // (hi byte)
+ outb(SERIAL_PORT + 3, 0x03); // 8 bits, no parity, one stop bit
+ outb(SERIAL_PORT + 2, 0xC7); // Enable FIFO with 14-byte threshold and clear it
+ outb(SERIAL_PORT + 4, 0x0B); // IRQs enabled, RTS/DSR set
+ gbDebug_SerialSetup = 1;
+ }
+ while( (inb(SERIAL_PORT + 5) & 0x20) == 0 );
+ outb(SERIAL_PORT, ch);
+ #endif