-struct sEHCI_CapRegs
-{
- Uint8 CapLength; // Byte offset of Operational registers
- Uint8 _pad;
- Uint16 HCIVersion; // BCD Version
- /**
- * Structural Parameters
- *
- * 0: 3 = Number of ports on this controller
- * 4 = Port Power Control
- * 5: 6 = Reserved (ZERO)
- * 7 = Port Routing Rules
- * 8:11 = Number of ports per companion controller
- * 12:15 = Number of companion controllers
- * 16 = Port Indicators
- * 17:19 = Reserved (ZERO)
- * 20:23 = Debug Port Number
- * 24:31 = Reserved (ZERO)
- */
- Uint32 HCSParams;
- /*
- * Capability Parameters
- *
- * 0 = 64-bit Addressing Capability
- * 1 = Programmable Frame List Flag
- * 2 = Asyncronous Schedule Park Capability
- * 3 = Reserved (ZERO)
- * 4: 7 = Isochronous Scheduling Threshold
- * 8:15 = EHCI Extended Capabilitys Pointer (0 = None)
- * 16:31 = Reserved (ZERO)
- */
- Uint32 HCCParams;
- /*
- * Companion Port Route Description
- */
- Uint64 HCSPPortRoute;
-};
-
-struct sEHCI_OpRegs
-{
- /**
- * USB Command Register
- *
- * 0 = Run/Stop (Stop, Run)
- * 1 = Host Controller Reset
- * 2: 3 = Frame List Size (1024 entries, 512, 256, Reserved)
- * 4 = Periodic Schedule Enable
- * 5 = Asynchronous Schedule Enable
- * 6 = Interrupt on Async Advance Doorbell
- * 7 = Light Host Controller Reset
- * 8: 9 = Asynchronous Schedule Park Mode Count
- * 10 = Reserved (ZERO)
- * 11 = Asynchronous Schedule Park Mode Enable
- * 12:15 = Reserved (ZERO)
- * 16:23 = Interrupt Threshold Control
- * 31:24 = Reserved (ZERO)
- */
- Uint32 USBCmd;
- /**
- * USB Status Register
- *
- * 0 = USB Interrupt
- * 1 = USB Error Interrupt
- * 2 = Port Change Detect
- * 3 = Frame List Rollover
- * 4 = Host System Error
- * 5 = Interrupt on Async Advance
- * 6:11 = Reserved (ZERO)
- * 12 = HCHalted
- * 13 = Reclamation
- * 14 = Periodic Schedule Status
- * 15 = Asynchronous Schedule Status
- * 16:31 = Reserved ?(Zero)
- */
- volatile Uint32 USBSts;
- /**
- * USB Interrupt Enable Register
- *
- * 0 = USB Interrupt Enable
- * 1 = USB Error Interrupt Enable
- * 2 = Port Change Interrupt Enable
- * 3 = Frame List Rollover Enable
- * 4 = Host System Error Enable
- * 5 = Interrupt on Async Advance Enable
- * 6:31 = Reserved (Zero)
- */
- Uint32 USBIntr;
- /**
- * Current microframe number (14 bits)
- *
- * Bits 14:3 are used as n index into PeridocListBase
- */
- volatile Uint32 FrIndex;
- /**
- * Control Data Structure Segment Register
- *
- * Most significant 32-bits of all addresses (only used if "64-bit addressing capability" is set)
- */
- Uint32 CtrlDSSegment;
- /**
- * Periodic Frame List Base Address Register
- */
- Uint32 PeridocListBase;
- /**
- * Current Asynchronous List Address Register
- */
- Uint32 AsyncListAddr;
- // Padding
- Uint32 _resvd[(0x40-0x1C)/4];
- /**
- * Configure Flag Register
- *
- * - When 0, all ports are routed to a USB1.1 controller
- *
- * 0 = Configure Flag - Driver sets when controller is configured
- * 1:31 = Reserved (ZERO)
- */
- Uint32 ConfigFlag;
- /**
- * Port Status and Control Register
- *
- * 0 = Current Connect Status
- * 1 = Connect Status Change
- * 2 = Port Enable
- * 3 = Port Enable Change
- * 4 = Over-current Active
- * 5 = Over-current change
- * 6 = Force Port Resume
- * 7 = Suspend
- * 8 = Port Reset
- * 9 = Reserved (ZERO)
- * 10:11 = Line Status (Use to detect non USB2) [USB2, USB2, USB1.1, USB2]
- * 12 = Port Power
- * 13 = Port Owner (Set to 1 to give to companion controller)
- * 14:15 = Port Indicator Control (Off, Amber, Green, Undef)
- * 16:19 = Port Test Control
- * 20 = Wake on Connect Enable
- * 21 = Wake on Disconnect Enable
- * 22 = Wake on Over-current Enable
- * 23:31 = Reserved (ZERO)
- */
- Uint32 PortSC[15];
-};
-
-#define USBCMD_Run 0x0001
-#define USBCMD_HCReset 0x0002
-#define USBCMD_PeriodicEnable 0x0010
-#define USBCMD_AsyncEnable 0x0020
-
-#define USBINTR_IOC 0x0001
-#define USBINTR_Error 0x0002
-#define USBINTR_PortChange 0x0004
-#define USBINTR_FrameRollover 0x0008
-#define USBINTR_HostSystemError 0x0010
-#define USBINTR_AsyncAdvance 0x0020
-
-// Isochronous (High-Speed) Transfer Descriptor
-struct sEHCI_iTD
-{
- Uint32 Link;
- struct {
- Uint16 Offset;
- Uint16 LengthSts;
- } Transactions[8];
- // -- 0 --
- // 0:6 - Device
- // 7 - Reserved
- // 8:11 - Endpoint
- // -- 1 --
- // 0:10 - Max packet size
- // 11 - IN/OUT
- Uint32 BufferPointers[8]; // Page aligned, low 12 bits are overloaded
-};
-
-// Split Transaction Isochronous Transfer Descriptor
-struct sEHCI_siTD
-{
- Uint32 Link;
- Uint32 Dest;
- Uint32 uFrame;
- Uint32 StatusLength;
- Uint32 Page0;
- Uint32 Page1;
- Uint32 BackLink;
-};