#include <common.h>
#include <stdarg.h>
+#define DEBUG_TO_E9 1
+#define DEBUG_TO_SERIAL 1
+#define SERIAL_PORT 0x3F8
+
// === IMPORTS ===
extern void Threads_Dump();
// === GLOBALS ===
int gDebug_Level = 0;
int giDebug_KTerm = -1;
+ int gbDebug_SerialSetup = 0;
// === CODE ===
static void E9(char ch)
{
if(giDebug_KTerm != -1)
VFS_Write(giDebug_KTerm, 1, &ch);
+
+ #if DEBUG_TO_SERIAL
+ if(!gbDebug_SerialSetup) {
+ outb(SERIAL_PORT + 1, 0x00); // Disable all interrupts
+ outb(SERIAL_PORT + 3, 0x80); // Enable DLAB (set baud rate divisor)
+ outb(SERIAL_PORT + 0, 0x03); // Set divisor to 3 (lo byte) 38400 baud
+ outb(SERIAL_PORT + 1, 0x00); // (hi byte)
+ outb(SERIAL_PORT + 3, 0x03); // 8 bits, no parity, one stop bit
+ outb(SERIAL_PORT + 2, 0xC7); // Enable FIFO with 14-byte threshold and clear it
+ outb(SERIAL_PORT + 4, 0x0B); // IRQs enabled, RTS/DSR set
+ gbDebug_SerialSetup = 1;
+ }
+ while( (inb(SERIAL_PORT + 5) & 0x20) == 0 );
+ outb(SERIAL_PORT, ch);
+ #endif
+
+ #if DEBUG_TO_E9
__asm__ __volatile__ ( "outb %%al, $0xe9" :: "a"(((Uint8)ch)) );
+ #endif
}
static void E9_Str(char *Str)
if(giDebug_KTerm != -1)
VFS_Close(giDebug_KTerm);
giDebug_KTerm = VFS_Open(File, VFS_OPENFLAG_WRITE);
- Log("Opend '%s' as %i\n", File, giDebug_KTerm);
+ Log("Opened '%s' as %i\n", File, giDebug_KTerm);
}
void Debug_Enter(char *FuncName, char *ArgTypes, ...)
}
// --- EXPORTS ---
+EXPORT(Log);
EXPORT(Warning);
EXPORT(Debug_Enter);
EXPORT(Debug_Log);