#include <semaphore.h>
// === CONSTANTS ===
-#define MAX_CONTROLLERS 4
+#define MAX_CONTROLLERS 8
//#define NUM_TDs 1024
#define NUM_TDs (PAGE_SIZE/sizeof(tUHCI_TD))
#define MAX_PACKET_SIZE 0x400
+#define MAX_INTERRUPT_LOAD 1024 // Maximum bytes per frame for interrupts
+
#define PID_IN 0x69
#define PID_OUT 0xE1
#define PID_SETUP 0x2D
{
tPAddr tmp;
gaUHCI_TDPool = (void *) MM_AllocDMA(1, 32, &tmp);
+ memset(gaUHCI_TDPool, 0, PAGE_SIZE);
}
// Enumerate PCI Bus, getting a maximum of `MAX_CONTROLLERS` devices
Host->FrameList[i] = addr | 2;
}
for( int i = 0; i < 64; i ++ ) {
- int ofs = dest_offsets[ i & (32-1) ];
+ int ofs = dest_offsets[ i & (32-1) ] * 2 + (i >= 32);
Uint32 addr = Host->PhysTDQHPage + ofs * sizeof(tUHCI_QH);
+ LOG("Slot %i to (%i,%i,%i,%i) ms slots",
+ ofs, 0 + i*4, 256 + i*4, 512 + i*4, 768 + i*4);
Host->FrameList[ 0 + i*4] = addr | 2;
Host->FrameList[256 + i*4] = addr | 2;
Host->FrameList[512 + i*4] = addr | 2;
if(gaUHCI_TDPool[i]._info.bActive == 0)
{
gaUHCI_TDPool[i].Link = 1;
- gaUHCI_TDPool[i].Control = (1 << 23);
+ gaUHCI_TDPool[i].Control = TD_CTL_ACTIVE;
gaUHCI_TDPool[i]._info.bActive = 1;
gaUHCI_TDPool[i]._info.QueueIndex = 128;
Mutex_Release( &lock );
Mutex_Acquire(&lock);
// Ensure that there is an interrupt for each used frame
- TD->Control |= (1 << 24);
+ TD->Control |= TD_CTL_IOC;
TD->_info.QueueIndex = ((tVAddr)QH - (tVAddr)Cont->TDQHPage->InterruptQHs) / sizeof(tUHCI_QH);
+ LOG("TD(%p)->QueueIndex = %i", TD, TD->_info.QueueIndex);
+ // Update length
+ TD->Control &= ~0x7FF;
+ TD->Control |= (TD->Token >> 21) & 0x7FF;
// Stop controller
_OutWord( Cont, USBCMD, 0x0000 );
td, Length, Type, Addr);
td->Control = (Length - 1) & 0x7FF;
- td->Control |= (1 << 23); // Active set
+ td->Control |= TD_CTL_ACTIVE; // Active set
td->Control |= (3 << 27); // 3 retries
+ // High speed device (must be explicitly enabled
+ if( Addr & 0x8000 )
+ ;
+ else
+ td->Control |= 1 << 26;
+
td->Token = ((Length - 1) & 0x7FF) << 21;
td->Token |= (bTgl & 1) << 19;
td->Token |= (Addr & 0xF) << 15;
tVAddr ptr = MM_MapTemp(td->BufferPointer);
memcpy( (void*)ptr, Data, Length );
MM_FreeTemp(ptr);
- td->Control |= (1 << 24);
+ td->Control |= TD_CTL_IOC;
}
td->_info.bFreePointer = 1;
}
if( info ) {
LOG("info = %p", info);
- td->Control |= (1 << 24);
+ td->Control |= TD_CTL_IOC;
td->_info.ExtraInfo = info;
}
void UHCI_int_SetInterruptPoll(tUHCI_Controller *Cont, tUHCI_TD *TD, int Period)
{
tUHCI_QH *qh;
- const int qh_offsets[] = { 0, 64, 96, 112, 120, 124, 126};
-// const int qh_sizes[] = {64, 32, 16, 8, 4, 2, 1};
+ const int qh_offsets[] = {126, 124, 120, 112, 96, 64, 0};
+ const int qh_sizes[] = { 1, 2, 4, 8, 16, 32, 64};
// Bounds limit
if( Period < 0 ) return ;
if( Period > 256 ) Period = 256;
+ if( Period == 255 ) Period = 256;
// Get the log base2 of the period
int period_slot = 0;
if( period_slot < 2 ) period_slot = 0;
else period_slot -= 2;
- TD->_info.QueueIndex = qh_offsets[period_slot]; // Actually re-filled in _AppendTD, but meh
- qh = Cont->TDQHPage->InterruptQHs + TD->_info.QueueIndex;
+ // _AppendTD calculates this from qh, but we use it to determine qh
+ TD->_info.QueueIndex = qh_offsets[period_slot];
// TODO: Find queue with lowest load
+#if 1
+ int min_load = 0;
+ int min_load_slot = 0;
+ for( int i = 0; i < qh_sizes[period_slot]; i ++ )
+ {
+ int load, index;
+ index = qh_offsets[period_slot] + i;
+ load = 0;
+ while( index >= 0 && index < 127 )
+ {
+ qh = Cont->TDQHPage->InterruptQHs + index;
+ load += Cont->InterruptLoad[index];
+ index = ((qh->Next & ~3) - Cont->PhysTDQHPage)/sizeof(tUHCI_QH);
+ }
+
+ LOG("Slot %i (and below) load %i", qh_offsets[period_slot] + i, load);
+
+ // i = 0 will initialise the values, otherwise update if lower
+ if( i == 0 || load < min_load )
+ {
+ min_load = load;
+ min_load_slot = i;
+ }
+ // - Fast return if no load
+ if( load == 0 ) break;
+ }
+ min_load_slot += qh_offsets[period_slot];
+ TD->_info.QueueIndex = min_load_slot;
+ if( min_load + (TD->Control & 0x7FF) > MAX_INTERRUPT_LOAD )
+ {
+ Log_Warning("UHCI", "Interrupt load on %i ms is too high (slot %i load %i bytes)",
+ 1 << (period_slot+2), min_load_slot, min_load
+ );
+ }
+ Cont->InterruptLoad[min_load_slot] += (TD->Control & 0x7FF);
+#endif
+ qh = Cont->TDQHPage->InterruptQHs + TD->_info.QueueIndex;
LOG("period_slot = %i, QueueIndex = %i",
period_slot, TD->_info.QueueIndex);
// Stop any errors causing the TD to stop (NAK will error)
- // - If the device goes away, the interrupt should be stopped anyway
+ // - If the device is unplugged, the removal code should remove the interrupt
TD->Control &= ~(3 << 27);
UHCI_int_AppendTD(Cont, qh, TD);
if( Period < 0 ) return NULL;
- ENTER("pPtr xDest iPeriod pCb pCbData pBuf, iLength",
+ ENTER("pPtr xDest iPeriod pCb pCbData pBuf iLength",
Ptr, Dest, Period, Cb, CbData, Buf, Length);
// TODO: Data toggle?
{
tUHCI_TD *td, *prev = NULL;
Uint32 cur_td;
+ int nCleaned = 0;
// Disable controller
_OutWord( Cont, USBCMD, 0x0000 );
// Scan QH list
cur_td = QH->Child;
+ LOG("cur_td = 0x%08x", cur_td);
while( !(cur_td & 1) )
{
td = UHCI_int_GetTDFromPhys(Cont, cur_td);
}
// Active? Ok.
- if( td->Control & (1 << 23) ) {
+ if( td->Control & TD_CTL_ACTIVE ) {
+ LOG("%p still active", td);
prev = td;
+ cur_td = td->Link;
continue ;
}
else
prev->Link = td->Link;
cur_td = td->Link;
+ nCleaned ++;
+ }
+
+ if( nCleaned == 0 ) {
+ LOG("Nothing cleaned... what the?");
}
// re-enable controller
if( byte_count + info->Offset <= PAGE_SIZE )
{
LOG("Single page copy %P to %P of %p",
- td->BufferPointer, info->FirstPage, td);
+ TD->BufferPointer, info->FirstPage, TD);
memcpy(dest + info->Offset, src + src_ofs, byte_count);
}
else
{
// Multi-page
LOG("Multi page copy %P to (%P,%P) of %p",
- td->BufferPointer, info->FirstPage, info->SecondPage, td);
+ TD->BufferPointer, info->FirstPage, info->SecondPage, TD);
int part_len = PAGE_SIZE - info->Offset;
memcpy(dest + info->Offset, src + src_ofs, part_len);
MM_FreeTemp( (tVAddr)dest );
// Callback
if( info->Callback != NULL )
{
- LOG("Calling cb %p", info->Callback);
+ LOG("Calling cb %p (%i bytes)", info->Callback, byte_count);
void *ptr = (void *) MM_MapTemp( TD->BufferPointer );
info->Callback( info->CallbackPtr, ptr, byte_count );
MM_FreeTemp( (tVAddr)ptr );
}
// Clean up info
- free( info );
- TD->_info.ExtraInfo = NULL;
+ if( TD->_info.QueueIndex > 127 )
+ {
+ free( info );
+ TD->_info.ExtraInfo = NULL;
+ }
}
void UHCI_int_InterruptThread(void *Pointer)
Threads_SetName("UHCI Interrupt Handler");
for( ;; )
{
+ int nSeen = 0;
+
LOG("zzzzz....");
// 0 = Take all
Semaphore_Wait(&gUHCI_InterruptSempahore, 0);
// Skip completely inactive TDs
if( td->_info.bActive == 0 ) continue ;
// Skip ones that are still in use
- if( td->Control & (1 << 23) ) continue ;
+ if( td->Control & TD_CTL_ACTIVE ) continue ;
+
+ nSeen ++;
// If no callback/alt buffer, mark as free and move on
if( td->_info.ExtraInfo )
UHCI_int_HandleTDComplete(Cont, td);
}
+ // Error check
+ if( td->Control & 0x00FF0000 ) {
+ LOG("td->control(Status) = %s%s%s%s%s%s%s%s",
+ td->Control & TD_CTL_ACTIVE ? "Active, " : "",
+ td->Control & TD_CTL_STALLED ? "Stalled, " : "",
+ td->Control & TD_CTL_DATABUFERR ? "Data Buffer Error, " : "",
+ td->Control & TD_CTL_BABBLE ? "Babble, " : "",
+ td->Control & TD_CTL_NAK ? "NAK, " : "",
+ td->Control & TD_CTL_CRCERR ? "CRC Error, " : "",
+ td->Control & TD_CTL_BITSTUFF ? "Bitstuff Error, " : "",
+ td->Control & TD_CTL_RESERVED ? "Reserved " : ""
+ );
+ LOG("From queue %i", td->_info.QueueIndex);
+ // Clean up QH (removing all inactive entries)
+ UHCI_int_CleanQH(Cont, Cont->TDQHPage->InterruptQHs + td->_info.QueueIndex);
+ td->Control = 0;
+ }
+
// Handle rescheduling of interrupt TDs
if( td->_info.QueueIndex <= 127 )
{
LOG("Re-schedule interrupt %p (offset %i)", td, td->_info.QueueIndex);
// TODO: Flip toggle?
- td->Control |= (1 << 23);
+ td->Control |= TD_CTL_ACTIVE;
// Add back into controller's interrupt list
UHCI_int_AppendTD(
Cont,
if( td->_info.bFreePointer )
MM_DerefPhys( td->BufferPointer );
- // Error check
- if( td->Control & 0x00FF0000 ) {
- LOG("td->control(Status) = %s%s%s%s%s%s%s%s",
- td->Control & (1 << 23) ? "Active " : "",
- td->Control & (1 << 22) ? "Stalled " : "",
- td->Control & (1 << 21) ? "Data Buffer Error " : "",
- td->Control & (1 << 20) ? "Babble " : "",
- td->Control & (1 << 19) ? "NAK " : "",
- td->Control & (1 << 18) ? "CRC Error, " : "",
- td->Control & (1 << 17) ? "Bitstuff Error, " : "",
- td->Control & (1 << 16) ? "Reserved " : ""
- );
- // Clean up QH (removing all inactive entries)
- UHCI_int_CleanQH(Cont, Cont->TDQHPage->InterruptQHs + td->_info.QueueIndex);
- }
-
// Clean up
LOG("Cleaned %p (->Control = %x)", td, td->Control);
td->_info.bActive = 0;
}
+
+ if( nSeen == 0 ) {
+ LOG("Why did you wake me?");
+ }
}
}
// int frame = (_InWord(Host, FRNUM) - 1) & 0x3FF;
Uint16 status = _InWord(Host, USBSTS);
+ LOG("%p: status = 0x%04x", Ptr, status);
// Interrupt-on-completion
if( status & 1 )
{
Semaphore_Signal(&gUHCI_InterruptSempahore, 1);
}
- LOG("status = 0x%04x", status);
_OutWord(Host, USBSTS, status);
}
git.ucc.asn.au / tpg / acess2.git / blobdiff
UCC git Repository :: git.ucc.asn.au