+++ /dev/null
-/* Industrialio buffer test code.
- *
- * Copyright (c) 2008 Jonathan Cameron
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- *
- * This program is primarily intended as an example application.
- * Reads the current buffer setup from sysfs and starts a short capture
- * from the specified device, pretty printing the result after appropriate
- * conversion.
- *
- * Command line parameters
- * generic_buffer -n <device_name> -t <trigger_name>
- * If trigger name is not specified the program assumes you want a dataready
- * trigger associated with the device and goes looking for it.
- *
- */
-
-#define _GNU_SOURCE
-
-#include <unistd.h>
-#include <dirent.h>
-#include <fcntl.h>
-#include <stdio.h>
-#include <errno.h>
-#include <sys/stat.h>
-#include <sys/dir.h>
-#include <linux/types.h>
-#include <string.h>
-#include <poll.h>
-#include <endian.h>
-#include <getopt.h>
-#include <inttypes.h>
-#include "iio_utils.h"
-
-/**
- * size_from_channelarray() - calculate the storage size of a scan
- * @channels: the channel info array
- * @num_channels: number of channels
- *
- * Has the side effect of filling the channels[i].location values used
- * in processing the buffer output.
- **/
-int size_from_channelarray(struct iio_channel_info *channels, int num_channels)
-{
- int bytes = 0;
- int i = 0;
- while (i < num_channels) {
- if (bytes % channels[i].bytes == 0)
- channels[i].location = bytes;
- else
- channels[i].location = bytes - bytes%channels[i].bytes
- + channels[i].bytes;
- bytes = channels[i].location + channels[i].bytes;
- i++;
- }
- return bytes;
-}
-
-void print2byte(int input, struct iio_channel_info *info)
-{
- /* First swap if incorrect endian */
- if (info->be)
- input = be16toh((uint16_t)input);
- else
- input = le16toh((uint16_t)input);
-
- /*
- * Shift before conversion to avoid sign extension
- * of left aligned data
- */
- input = input >> info->shift;
- if (info->is_signed) {
- int16_t val = input;
- val &= (1 << info->bits_used) - 1;
- val = (int16_t)(val << (16 - info->bits_used)) >>
- (16 - info->bits_used);
- printf("%05f ", ((float)val + info->offset)*info->scale);
- } else {
- uint16_t val = input;
- val &= (1 << info->bits_used) - 1;
- printf("%05f ", ((float)val + info->offset)*info->scale);
- }
-}
-/**
- * process_scan() - print out the values in SI units
- * @data: pointer to the start of the scan
- * @channels: information about the channels. Note
- * size_from_channelarray must have been called first to fill the
- * location offsets.
- * @num_channels: number of channels
- **/
-void process_scan(char *data,
- struct iio_channel_info *channels,
- int num_channels)
-{
- int k;
- for (k = 0; k < num_channels; k++)
- switch (channels[k].bytes) {
- /* only a few cases implemented so far */
- case 2:
- print2byte(*(uint16_t *)(data + channels[k].location),
- &channels[k]);
- break;
- case 4:
- if (!channels[k].is_signed) {
- uint32_t val = *(uint32_t *)
- (data + channels[k].location);
- printf("%05f ", ((float)val +
- channels[k].offset)*
- channels[k].scale);
-
- }
- break;
- case 8:
- if (channels[k].is_signed) {
- int64_t val = *(int64_t *)
- (data +
- channels[k].location);
- if ((val >> channels[k].bits_used) & 1)
- val = (val & channels[k].mask) |
- ~channels[k].mask;
- /* special case for timestamp */
- if (channels[k].scale == 1.0f &&
- channels[k].offset == 0.0f)
- printf("%" PRId64 " ", val);
- else
- printf("%05f ", ((float)val +
- channels[k].offset)*
- channels[k].scale);
- }
- break;
- default:
- break;
- }
- printf("\n");
-}
-
-int main(int argc, char **argv)
-{
- unsigned long num_loops = 2;
- unsigned long timedelay = 1000000;
- unsigned long buf_len = 128;
-
- int ret, c, i, j, toread;
- int fp;
-
- int num_channels;
- char *trigger_name = NULL, *device_name = NULL;
- char *dev_dir_name, *buf_dir_name;
-
- int datardytrigger = 1;
- char *data;
- ssize_t read_size;
- int dev_num, trig_num;
- char *buffer_access;
- int scan_size;
- int noevents = 0;
- char *dummy;
-
- struct iio_channel_info *channels;
-
- while ((c = getopt(argc, argv, "l:w:c:et:n:")) != -1) {
- switch (c) {
- case 'n':
- device_name = optarg;
- break;
- case 't':
- trigger_name = optarg;
- datardytrigger = 0;
- break;
- case 'e':
- noevents = 1;
- break;
- case 'c':
- num_loops = strtoul(optarg, &dummy, 10);
- break;
- case 'w':
- timedelay = strtoul(optarg, &dummy, 10);
- break;
- case 'l':
- buf_len = strtoul(optarg, &dummy, 10);
- break;
- case '?':
- return -1;
- }
- }
-
- if (device_name == NULL)
- return -1;
-
- /* Find the device requested */
- dev_num = find_type_by_name(device_name, "iio:device");
- if (dev_num < 0) {
- printf("Failed to find the %s\n", device_name);
- ret = -ENODEV;
- goto error_ret;
- }
- printf("iio device number being used is %d\n", dev_num);
-
- asprintf(&dev_dir_name, "%siio:device%d", iio_dir, dev_num);
- if (trigger_name == NULL) {
- /*
- * Build the trigger name. If it is device associated its
- * name is <device_name>_dev[n] where n matches the device
- * number found above
- */
- ret = asprintf(&trigger_name,
- "%s-dev%d", device_name, dev_num);
- if (ret < 0) {
- ret = -ENOMEM;
- goto error_ret;
- }
- }
-
- /* Verify the trigger exists */
- trig_num = find_type_by_name(trigger_name, "trigger");
- if (trig_num < 0) {
- printf("Failed to find the trigger %s\n", trigger_name);
- ret = -ENODEV;
- goto error_free_triggername;
- }
- printf("iio trigger number being used is %d\n", trig_num);
-
- /*
- * Parse the files in scan_elements to identify what channels are
- * present
- */
- ret = build_channel_array(dev_dir_name, &channels, &num_channels);
- if (ret) {
- printf("Problem reading scan element information\n");
- printf("diag %s\n", dev_dir_name);
- goto error_free_triggername;
- }
-
- /*
- * Construct the directory name for the associated buffer.
- * As we know that the lis3l02dq has only one buffer this may
- * be built rather than found.
- */
- ret = asprintf(&buf_dir_name,
- "%siio:device%d/buffer", iio_dir, dev_num);
- if (ret < 0) {
- ret = -ENOMEM;
- goto error_free_triggername;
- }
- printf("%s %s\n", dev_dir_name, trigger_name);
- /* Set the device trigger to be the data ready trigger found above */
- ret = write_sysfs_string_and_verify("trigger/current_trigger",
- dev_dir_name,
- trigger_name);
- if (ret < 0) {
- printf("Failed to write current_trigger file\n");
- goto error_free_buf_dir_name;
- }
-
- /* Setup ring buffer parameters */
- ret = write_sysfs_int("length", buf_dir_name, buf_len);
- if (ret < 0)
- goto error_free_buf_dir_name;
-
- /* Enable the buffer */
- ret = write_sysfs_int("enable", buf_dir_name, 1);
- if (ret < 0)
- goto error_free_buf_dir_name;
- scan_size = size_from_channelarray(channels, num_channels);
- data = malloc(scan_size*buf_len);
- if (!data) {
- ret = -ENOMEM;
- goto error_free_buf_dir_name;
- }
-
- ret = asprintf(&buffer_access, "/dev/iio:device%d", dev_num);
- if (ret < 0) {
- ret = -ENOMEM;
- goto error_free_data;
- }
-
- /* Attempt to open non blocking the access dev */
- fp = open(buffer_access, O_RDONLY | O_NONBLOCK);
- if (fp == -1) { /* If it isn't there make the node */
- printf("Failed to open %s\n", buffer_access);
- ret = -errno;
- goto error_free_buffer_access;
- }
-
- /* Wait for events 10 times */
- for (j = 0; j < num_loops; j++) {
- if (!noevents) {
- struct pollfd pfd = {
- .fd = fp,
- .events = POLLIN,
- };
-
- poll(&pfd, 1, -1);
- toread = buf_len;
-
- } else {
- usleep(timedelay);
- toread = 64;
- }
-
- read_size = read(fp,
- data,
- toread*scan_size);
- if (read_size == -EAGAIN) {
- printf("nothing available\n");
- continue;
- }
- for (i = 0; i < read_size/scan_size; i++)
- process_scan(data + scan_size*i,
- channels,
- num_channels);
- }
-
- /* Stop the buffer */
- ret = write_sysfs_int("enable", buf_dir_name, 0);
- if (ret < 0)
- goto error_close_buffer_access;
-
- /* Disconnect the trigger - just write a dummy name. */
- write_sysfs_string("trigger/current_trigger",
- dev_dir_name, "NULL");
-
-error_close_buffer_access:
- close(fp);
-error_free_data:
- free(data);
-error_free_buffer_access:
- free(buffer_access);
-error_free_buf_dir_name:
- free(buf_dir_name);
-error_free_triggername:
- if (datardytrigger)
- free(trigger_name);
-error_ret:
- return ret;
-}
git.ucc.asn.au / matches / MCTX3420.git / blobdiff
UCC git Repository :: git.ucc.asn.au